CP43操作手册.pdf.pdf - 第317页

Chapter 4 V ision Processing Errors Part 6 4. V ision Processing Errors This chapter explains the various vision processing err ors which may occur . 4.1 Fiducial Mark and Block Skip Mark Error Messages Error Code 1C1200…

Chapter 3 MCS Error Code TablePart 6

Error Code: 22007514

MCS Display: DTX7512 Error

Cause: The program’s machine type does not match the previously

transmitted program machine type.

Remedy: Make sure program machine types match.

Error Code: 22007515

Cause: After a download request was made an error occurred in the

MCS/2H program check.

Remedy: Verify the program.

Error Code: 2200AB00

MCS Display: DTXAB00 Error

Cause: After a download request was made an answer was not received

from the machine within the preset time limit.

Remedy: Verify that the machine and MCS 30 are both booted up.

Error Code: 2200AB01

MCS Display: DTXAB01 Error

Cause: A communication error returned from the machine while a

program was being downloaded.

Remedy: Select the [Ctrl] and [E] keys from the UCI menu to obtain a

display of errors. Reference the error codes that have returned

from the machine.

Error Code: 2200AB04

MCS Display: DTXAB04 Error

Cause: The Part data for the requested program does not exist.

Remedy: Use the file services directory to verify whether the Part data file

for the requested program exists or not.

Error Code: 2200AA00

MCS Display: GDXAA00 Error or GQXAA00 Error

Cause: The requested GD file or GQ file does not exist in MCS/2H.

Remedy: Use the file services directory to check for the file.

6 – 16Version 2.0

Chapter 4 Vision Processing ErrorsPart 6

4. Vision Processing Errors

This chapter explains the various vision processing errors which may occur.

4.1 Fiducial Mark and Block Skip Mark Error Messages

Error Code 1C120002

Cause: Either the size of the mark designated in the production

program is different from the mark size actually read during

vision processing or the mark types are different.

Remedy: Verify that the size and type of marks on the board match those

specified in the production program.

Error Code 1C200001

Cause: The mark search range designated in the production program is

too close to the edge of the camera field of vision.

Remedy: Change the production program so that the mark is set in the

center of the field of vision.

Error Code 1C200002

Cause: There was not a distinct enough contrast between the mark and

the mark search area for the mark to be recognized.

Remedy: Obtain a better contrast between the mark and the mark search

area.

6 – 17Version 2.0

Chapter 4 Vision Processing ErrorsPart 6

4.2 Calibration (Proper Data Measurement) Error Messages

Error Code 1C310010

Cause: Training cannot be carried out.

Remedy: Try rebooting the machine. This error generally does not occur.

Error Code 1C310011

Cause: A contradiction occurred during calibration.

Remedy: This error generally does not occur. Reboot the machine.

Error Code 1C310013

Cause: A movement command contradiction occurred during

calibration.