CP43操作手册.pdf.pdf - 第321页
Chapter 4 V ision Processing Errors Part 6 Error Code 1C410114 Cause: L center tolerance check error . Remedy: Change the center tolerance lcenter_tolerance . Error Code 1C410115 Cause: D center tolerance check error . R…
Chapter 4 Vision Processing ErrorsPart 6
Error Code 1C410105
Cause: The coarse edge is not suitable.
Remedy: Check coarse edge in the generic device description .
Error Code 1C410106
Cause: Nozzle diameter is too large.
Remedy: Choose a smaller nozzle. Verify that the nozzle is one that is
used in Part data.
Error Code 1C410107
Cause: Nozzle backlight diameter is small.
Remedy: Choose a nozzle with a larger backlight. Verify that the nozzle is
entered in Part data.
Error Code 1C410108
Cause: Nozzle training (center measurement) has not been set.
Remedy: Center the nozzle.
Error Code 1C410109
Cause: Vision processing segment could not be inspected.
Remedy: Check the problem using the vision processing debug monitor.
Error Code 1C410110
Cause: L size tolerance check error.
Remedy: Change the edge tolerance
e2_tolerance, e4_tolerance, or
check the segment size l1 l_size, l2 l_size.
Error Code 1C410111
Cause: D size tolerance check error.
Remedy: Change the edge tolerance
e1_tolerance, e3_tolerance, or
check the segment size d1 d_size, d2 d_size.
6 – 20Version 2.0
Chapter 4 Vision Processing ErrorsPart 6
Error Code 1C410114
Cause: L center tolerance check error.
Remedy: Change the center tolerance
lcenter_tolerance.
Error Code 1C410115
Cause: D center tolerance check error.
Remedy: Change the center tolerance
d center_tolerance.
Error Code 1C410116
Cause: H position error. There is slippage at the pick-up point.
Remedy: Determine the causes of the slippage. For example, check the
device offset in Proper data, check that the feeder is working
correctly, etc.
Error Code 1C410117
Cause: V position error. There is slippage at the pick-up point.
Remedy: Determine the causes of the slippage. For example, check the
device offset in Proper data, check that the feeder is working
correctly, etc.
Error Code 1C410118
Cause: Rotational position error. There is too much rotation slippage.
This indicates a part angle pickup error.
Remedy: Check the Proper device offset.
Error Code 1C410120
Cause: Part is too large.
Remedy: Check the relevant specifications of the machine.
Error Code 1C410121
Cause: Part is too large.
Remedy: Check the relevant specifications of the machine.
6 – 21Version 2.0
Chapter 4 Vision Processing ErrorsPart 6
Error Code 1C410122
Cause: There is no coarse edge.
Remedy: When the frontlight is being used a coarse edge is necessary.
Check the generic device description.
Error Code 1C410123
Cause: Pickup tolerance is too large.
Remedy: Decrease the tolerance in the generic device description (refer to
‘total tolerance x,’ ‘total tolerance y’ and ‘rotation tolerance’).
Error Code 1C410124
Cause: Pickup tolerance is too large.
Remedy: Decrease the tolerance in the generic device description (refer to
‘total tolerance x,’ ‘total tolerance y’ and ‘rotation tolerance’).
Error Code 1C410125
Cause: A preset time limit has been exceeded.
Error Code 1C410126
Cause: Even though coarse edge was performed, the pick-up tolerance
is too large.
Remedy: Decrease the tolerance in the generic device description (refer to
‘total tolerance x,’ ‘total tolerance y’ and ‘rotation tolerance’).
Error Code 1C410127
Cause: Coarse edge was not found.
Error Code 1C410128
Cause: Training cannot be carried out because the pickup tolerance is
too large.
Remedy: Decrease the tolerance in the generic device description (refer to
‘total tolerance x,’ ‘total tolerance y’ and ‘rotation tolerance’).
6 – 22Version 2.0