DEUKYX-193-4110_G5S2_VOL4 - 第246页
DEUKYX 3-68 193-41 10 3.5 T ray-Feeder (Block2) Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung 441 102 T ray Pallet Returning Error (Block2) Elevator movement position error ----- 441 103 T ray Pallet R…
DEUKYX
3-67193-4110
3.5 Tray-Feeder (Block2)
3.5 Tray-Feeder (Block2)
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
440201 Tray Motor Error (Block2)
Elevator abnormal stop
-----
440202 Tray Motor Error (Block2)
Elevator abnormal stop
-----
440203 Tray Motor Error (Block2)
Traverse abnormal stop
-----
440301 Tray Rack Shutter open/close error (Block2)
The Rack Shutter did not open in prescribed time.
-----
440302 Tray Rack Shutter open/close error (Block2)
The Rack Shutter did not close in prescribed time.
Prüfen Sie, ob sich die Palette im Einschub verklemmt hat.
440401 Tray Pallet Chuck open/close error (Block2)
The Pallet Chuck did not open in prescribed time.
-----
440402 Tray Pallet Chuck open/close error (Block2)
The Pallet Chuck did not close in prescribed time.
-----
441001 Tray Supply Operation Error (Block2)
-----
441002 Tray Supply Operation Error (Block2)
Tray steps No. disagreement of draw out(return operation)
-----
441003 Tray Supply Operation Error (Block2)
Tray steps No. disagreement of draw out(return operation)
-----
441004 Tray Supply Operation Error (Block2)
The operation mode is illegal. (system)
-----
441005 Tray Supply Operation Error (Block2)
TV axis's position is irregular
-----
441006 Tray Supply Operation Error (Block2)
Magazine classication disagreement
Führen Sie die Überprüfung von zehn Schritten vom Magazin und von 15 Schrit-
ten durch.
441101 Tray Pallet Returning Error (Block2)
Elevator pre-check error
-----
DEUKYX
3-68193-4110
3.5 Tray-Feeder (Block2)
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
441102 Tray Pallet Returning Error (Block2)
Elevator movement position error
-----
441103 Tray Pallet Returning Error (Block2)
Elevator wave form setting error
-----
441104 Tray Pallet Returning Error (Block2)
Elevator operating error
-----
441201 Tray Pallet Returning Error (Block2)
Traverse pre-check error
-----
441202 Tray Pallet Returning Error (Block2)
Traverse movement position error
-----
441203 Tray Pallet Returning Error (Block2)
Traverse wave form setting error
-----
441204 Tray Pallet Returning Error (Block2)
Traverse operating error
-----
441206 Tray Pallet Returning Error (Block2)
No palette when the return begins.(B15411)
-----
441301 Tray Pallet Draw out Error (Block2)
Elevator pre-check error
-----
441302 Tray Pallet Draw out Error (Block2)
Elevator movement position error
-----
441303 Tray Pallet Draw out Error (Block2)
Elevator wave form setting error
-----
441304 Tray Pallet Draw out Error (Block2)
Elevator operating error
-----
441305 Tray Pallet Draw out Error (Block2)
Elevator abnormal stop
-----
441401 Tray Pallet Draw out Error (Block2)
Traverse pre-check error
-----
441402 Tray Pallet Draw out Error (Block2)
Traverse movement position error
-----
DEUKYX
3-69193-4110
3.5 Tray-Feeder (Block2)
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
441403 Tray Pallet Draw out Error (Block2)
Traverse wave form setting error
-----
441404 Tray Pallet Draw out Error (Block2)
Traverse operating error
-----
441405 Tray Pallet Draw out Error (Block2)
Traverse operating error
-----
441406 Tray Pallet Draw out Error (Block2)
No palette when drawing out begins.(B15411)
-----
441407 Tray Pallet Draw out Error (Block2)
Cannot detect the pallet to pull out(B15505, B15506)
Prüfen Sie, ob die Palette im Magazin richtig eingerichtet ist. Wenn dies der Fall
ist, prüfen Sie den Sensor.
441501 Move to Tray Elevator supply/exchange position error (Block2)
Elevator pre-check error
-----
441502 Move to Tray Elevator supply/exchange position error (Block2)
Elevator movement position error
-----
441504 Move to Tray Elevator supply/exchange position error (Block2)
Elevator operating error
441602 Tray Feeder Zeroing Error (Block2)
Tray feeder zeroing Servo ON error
-----
441603 Tray Feeder Zeroing Error (Block2)
Traverse pallet search error
-----
441604 Tray Feeder Zeroing Error (Block2)
Elevator zeroing error
-----
441605 Tray Feeder Zeroing Error (Block2)
Elevator zeroing error
-----
441606 Tray Feeder Zeroing Error (Block2)
The palette was detected though there was no draw out history.
Öffnen Sie die Abdeckung und entnehmen Sie die Palette.
441607 Tray Feeder Zeroing Error (Block2)
Elevator return steps movement error
-----