DEUKYX-193-4110_G5S2_VOL4 - 第325页
DEUKYX 3-147 193-41 10 3.13 Autom. T eaching Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung 601a0b Side view camera correction re-teach Offset correction can not be completed. Please use the big nozzle(…
DEUKYX
3-146193-4110
3.13 Autom. Teaching
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
601311 Noz stocker offset teaching
Error of output-movement of Nozzle Stocker
-----
601401 Teaching Comp. Erkenn. Camera Magnication Teach
Time-out of communication with recognition.
Ist die Verbindung zur Erkennung unterbrochen? Bitte prüfen.
601402 Teaching Comp. Erkenn. Camera Magnication Teach
Error of Recognition Command response
-----
601a01 Side view camera correction re-teach
The Side View Camera reading is abnormal.
Prüfen Sie, ob der Aufnehmer an der Position haftet.
601a02 Side view camera correction re-teach
Offset correction can not be completed. Please use the big nozzle(HA05) teach
again and adjust the light & receive optical Axis
-----
601a03 Side view camera correction re-teach
Nozzle can not be detected.
-----
601a04 Side view camera correction re-teach
Side View Camera Control is abnormal.
-----
601a05 Side view camera correction re-teach
Offset correction can not be completed. Please use the big nozzle(HA05) teach
again and adjust the light & receive optical Axis(All samples are E/R-Err7)
-----
601a06 Side view camera correction re-teach
Offset correction can not be completed. Please use the big nozzle(HA05) teach
again and adjust the light & receive optical Axis(All samples are E/NR-Err8)
Offset correction can not be completed. Please use the big nozzle(HA05) teach
-----
601a07 Side view camera correction re-teach
again and adjust the light & receive optical Axis(Edge detect error-Err9)
-----
601a08 Side view camera correction re-teach
Offset correction can not be completed. Please use the big nozzle(HA05) teach
again and adjust the light & receive optical Axis(Insufcient samples-Err10)
-----
601a09 Side view camera correction re-teach
Offset correction can not be completed. Please use the big nozzle(HA05) teach again
and adjust the light & receive optical Axis(Insufcient correcting samples-Err14)
-----
601a0a Side view camera correction re-teach
Offset correction can not be completed. Please use the big nozzle(HA05) teach
again and adjust the light & receive optical Axis(Fail to create correction-Err15)
-----
DEUKYX
3-147193-4110
3.13 Autom. Teaching
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
601a0b Side view camera correction re-teach
Offset correction can not be completed. Please use the big nozzle(HA05) teach
again and adjust the light & receive optical Axis(Accuracy check NG-Err16)
-----
601a0c Side view camera correction re-teach
Offset correction can not be completed. Please use the big nozzle(HA05) teach
again and adjust the light & receive optical Axis(Fail to save-Err17)
-----
601a0d Side view camera correction re-teach
The measurement value of the nozzle is not within 0.2mm to 0.6mm.
Justieren Sie die Höhe der Seitenansichtkamera oder tauschen Sie sie aus.
601a0e Side view camera correction re-teach
The Side View Camera control has an error.(err2, err3)
Alle E/NR-Fehler. Es besteht die Möglichkeit, dass die Lichtquelle oder der
Empfänger defekt ist.
601a0f Side view camera correction re-teach
The Side View Cameracontrol has an error.(err1)
Kann ein LP-Fehler sein. Fehler
601a10 Side view camera correction re-teach
The Side View Camera control has an error.(err4)
Die Abstrahlung der Lichtquelle ist zu niedrig. Es besteht die Möglichkeit, dass die
Lichtquelle defekt ist.
601a11 Side view camera correction re-teach
No strobe response
Prüfen Sie die HLS-Verkabelung. Prüfen Sie die LP-Adresse.
601f01 NL Axis offset teach
Error before Side View Camera measurement began
-----
601f02 NL Axis offset teach
ODD Noz is placed on Head, or error is detected during side view camera.
-----
601f03 NL Axis offset teach
Error of NS-axis movement
-----
601f04 NL Axis offset teach
Error of DD-axis movement
-----
601f05 NL Axis offset teach
Error of NL-axis movement
-----
601f06 NL Axis offset teach
Error of DD/NS-axis movement
-----
601f07 NL Axis offset teach
Time-out when Side View Camera measurement began
-----
601f08
NL Axis offset teach
Read Time-out of Side View Camera measurement
-----
DEUKYX
3-148193-4110
3.13 Autom. Teaching
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
601f09
NL Axis offset teach
Time-out of NL-axis movement
-----
601f0a
NL Axis offset teach
Time-out of DD/NS-axis movement
-----
601f0b
NL Axis offset teach
Error during Teach
-----
602001
Writing Side View Camera Program
Fail to write Side View Camera Program
-----
602101
Teaching Tray Pallet Transition
Elevator Check Error
-----
602102
Teaching Tray Pallet Transition
Error in Elevator axis movement position calculating
Bitte passen Sie die Höhe der Rollen der Hubeinheit an, um sie höher zu machen.
602103
Teaching Tray Pallet Transition
Elevator axis Movement Error
-----
602104
Teaching Tray Pallet Transition
Time-out in elevator axis movement
-----
602105
Teaching Tray Pallet Transition
Elevator axis Movement Error
-----
602106
Teaching Tray Pallet Transition
Time-out in elevator axis movement
-----
602107
Teaching Tray Pallet Transition
Elevator axis Movement Error
-----
602108
Teaching Tray Pallet Transition
Error in elevator Stop Auto Run
-----
602109
Teaching Tray Pallet Transition
Time-out in elevator Stop Auto Run
-----
60210A
Teaching Tray Pallet Transition
Error in getting current position of Elevator axis
-----
60210B
Teaching Tray Pallet Transition
Program Error
-----