DEUKYX-193-4110_G5S2_VOL4 - 第326页
DEUKYX 3-148 193-41 10 3.13 Autom. T eaching Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung 601f09 NL Axis offset teach T ime-out of NL-axis movement ----- 601f0a NL Axis offset teach T ime-out of DD/NS…
DEUKYX
3-147193-4110
3.13 Autom. Teaching
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
601a0b Side view camera correction re-teach
Offset correction can not be completed. Please use the big nozzle(HA05) teach
again and adjust the light & receive optical Axis(Accuracy check NG-Err16)
-----
601a0c Side view camera correction re-teach
Offset correction can not be completed. Please use the big nozzle(HA05) teach
again and adjust the light & receive optical Axis(Fail to save-Err17)
-----
601a0d Side view camera correction re-teach
The measurement value of the nozzle is not within 0.2mm to 0.6mm.
Justieren Sie die Höhe der Seitenansichtkamera oder tauschen Sie sie aus.
601a0e Side view camera correction re-teach
The Side View Camera control has an error.(err2, err3)
Alle E/NR-Fehler. Es besteht die Möglichkeit, dass die Lichtquelle oder der
Empfänger defekt ist.
601a0f Side view camera correction re-teach
The Side View Cameracontrol has an error.(err1)
Kann ein LP-Fehler sein. Fehler
601a10 Side view camera correction re-teach
The Side View Camera control has an error.(err4)
Die Abstrahlung der Lichtquelle ist zu niedrig. Es besteht die Möglichkeit, dass die
Lichtquelle defekt ist.
601a11 Side view camera correction re-teach
No strobe response
Prüfen Sie die HLS-Verkabelung. Prüfen Sie die LP-Adresse.
601f01 NL Axis offset teach
Error before Side View Camera measurement began
-----
601f02 NL Axis offset teach
ODD Noz is placed on Head, or error is detected during side view camera.
-----
601f03 NL Axis offset teach
Error of NS-axis movement
-----
601f04 NL Axis offset teach
Error of DD-axis movement
-----
601f05 NL Axis offset teach
Error of NL-axis movement
-----
601f06 NL Axis offset teach
Error of DD/NS-axis movement
-----
601f07 NL Axis offset teach
Time-out when Side View Camera measurement began
-----
601f08
NL Axis offset teach
Read Time-out of Side View Camera measurement
-----
DEUKYX
3-148193-4110
3.13 Autom. Teaching
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
601f09
NL Axis offset teach
Time-out of NL-axis movement
-----
601f0a
NL Axis offset teach
Time-out of DD/NS-axis movement
-----
601f0b
NL Axis offset teach
Error during Teach
-----
602001
Writing Side View Camera Program
Fail to write Side View Camera Program
-----
602101
Teaching Tray Pallet Transition
Elevator Check Error
-----
602102
Teaching Tray Pallet Transition
Error in Elevator axis movement position calculating
Bitte passen Sie die Höhe der Rollen der Hubeinheit an, um sie höher zu machen.
602103
Teaching Tray Pallet Transition
Elevator axis Movement Error
-----
602104
Teaching Tray Pallet Transition
Time-out in elevator axis movement
-----
602105
Teaching Tray Pallet Transition
Elevator axis Movement Error
-----
602106
Teaching Tray Pallet Transition
Time-out in elevator axis movement
-----
602107
Teaching Tray Pallet Transition
Elevator axis Movement Error
-----
602108
Teaching Tray Pallet Transition
Error in elevator Stop Auto Run
-----
602109
Teaching Tray Pallet Transition
Time-out in elevator Stop Auto Run
-----
60210A
Teaching Tray Pallet Transition
Error in getting current position of Elevator axis
-----
60210B
Teaching Tray Pallet Transition
Program Error
-----
DEUKYX
3-149193-4110
3.13 Autom. Teaching
Error ID Fehlername, Beschreibung, Ursache und Wiederherstellung
602201 Teaching Pulling Traverse
Pre-check error in driver-axis
-----
602202 Teaching Pulling Traverse
Elevator is not in Component Reload position
-----
602203 Teaching Pulling Traverse
L-axis/HL-axis is falling
-----
602204 Teaching Pulling Traverse
Traverse-axis Zeroing Error
-----
602205 Teaching Pulling Traverse
Traverse-axis Zeroing Time-out
-----
602206 Teaching Pulling Traverse
Pallet pulled out is detected during zeroing
-----
602207 Teaching Pulling Traverse
Error in Traverse-axis movement position calculating
-----
602208 Teaching Pulling Traverse
Traverse-axis Movement Error
-----
602209 Teaching Pulling Traverse
Traverse-axis Movement time-out
-----
60220a Teaching Pulling Traverse
Error in XY-axis movement position calculating(Pin Recog. Position)
-----
60220b Teaching Pulling Traverse
Error of XY-axis movement
-----
60220c Teaching Pulling Traverse
Time-out in XY-axis movement
-----
60220d Teaching Pulling Traverse
Error of P.C.B. Recognition Lamp On
-----
60220e Teaching Pulling Traverse
Time-out of P.C.B. Recognition Lamp On
-----
60220f Teaching Pulling Traverse
Image Capture Error
-----