00196624-04_Service Manual WPC5_6_EN_01-2019 - 第116页
Service Ma nual W PC5 / WPC6 ➢ Place the „ Jig for W PC4-6 base plate “ [03073 064-01] (or a WPTC) in the feed ar ea (machine). ➢ Make sure t hat the driver h as engaged with the g auge proper ly and that the gaug e is c…
Service Manual WPC5 / WPC6
4.1.2 Teaching the Zero Point Position
This calibration step determines the position of the lifting axis, for correct movement of the
waffle-pack tray carrier out of the tower (without obstacles).
➢
Remove all waffle-pack tray carriers (WPTC) from the WPC.
➢ Select the lifting axis (1).
➢ Select the function (2).
➢ Select (3).
➢
Follow the instruction shown and continue with .
➢ Follow the instruction shown (see following diagram) and continue with
Service Manual WPC5 / WPC6
➢ Place the „Jig for WPC4-6 base plate“ [03073064-01] (or a WPTC) in the feed area
(machine).
➢ Make sure that the driver has engaged with the gauge properly and that the gauge is
correctly fitted onto the guide rail.
Service Manual WPC5 / WPC6
➢ Use the arrow keys (2) to select the required pitch (1) (0.1 mm in this example).
➢ Use the arrow keys to move the tower so that the tray can be correctly moved from the feed
axis into the tower.
➢ Continue with (3).
➢ Follow the instruction shown and confirm the changes made with .