00900135-02_ID_OIS_SIS_15.1_R18-1_DE_EN - 第72页
ASM OIS/SIS Databases 15.1 ( R18 - 1) / Interface De scription 05/2018 Edition 72 34921 X-Feeder: Input voltage too low 34922 X feeder: Component was not moved to target position within time limit 34924 X feeder: Foil to…
ASM OIS/SIS Databases 15.1 (R18-1) / Interface Description 05/2018 Edition
71
34404
Fatal error on a segment
34428
Cannot create dip job
34429
Component combination is not allowed due to size restrictions
34430
Nozzle combination is not allowed due to size restrictions
34432
Fatal error, maximum number of retries reached
34433
Fatal error, maximum number of retries reached
34439
Component present before pick up
34440
Component not present after pickup
34441
Component too small after pickup
34442
Component too large after pickup
34443
Component cannot be picked up
34450
No component available for placement
34451
Component too small before placement
34452
Component too large before placement
34453
Nozzle not empty after placement
34456
Component cannot be placed
34460
Component cannot be measured
34468
Cannot recycle component
34469
Cannot recycle component
34470
Cannot recycle component
34474
A nozzle change is needed, but not permitted during production. Too
many segments are disabled
34475
Failed to create job for returning nozzle
34476
Failed to create job for picking up nozzle
34477
Failed to create job for centering nozzle
34479
Cannot dip component
34480
Cannot calibrate nozzle changer
34481
Pickup position cannot be reached
34482
Placement position cannot be reached
34483
Dip position cannot be reached
34496
Glue cannot be applied to the component
34499
Component sensor covered before pickup
34602
Cannot address carrier
34603
Cannot address magazine
34810
Cannot pick up component
34902
An error occurred when picking up a component
34903
Division deactivated after component pickup errors
34915
Division not available. Reel has been removed
34920
X feeder: Error on removing foil
ASM OIS/SIS Databases 15.1 (R18-1) / Interface Description 05/2018 Edition
72
34921
X-Feeder: Input voltage too low
34922
X feeder: Component was not moved to target position within time limit
34924
X feeder: Foil torn
34925
X-Feeder: Tape drive error
34926
X feeder: Foil removal device blocked
34927
X-Feeder: Removal handle not latched
34930
X-Feeder: Reference run error
34933
X-Feeder: Error saving EEPROM
34935
X-Feeder: Splice sensor failure
36165
Dip module: Medium empty
Table 8-2: OIS relevant machine error messages
ASM OIS/SIS Databases 15.1 (R18-1) / Interface Description 05/2018 Edition
73