TRS Advanced WB Intel Issue 02 - 第111页
Issue 2, Nov 14 T R R S Advanc e e d Maintena 111 nce
TRS Advanced Maintenance
110
Issue 2, Nov 14
Objective 37: Calibrate Belt Speed inc. Auxiliaries
Complete the belt speed calibration on the machine (inc Auxiliary Rails).
Calibration of two Auxiliary Rails Belt Speeds:
Two auxiliary rails belt speeds are controlled by the M27 and are not adjustable through the
software. You will need a calibration loom 217212.
The belt speeds can be measured using a tachometer on the input or output pulleys.
Check the speeds are set to …………… (high) speed.
Calibration of centre section rails belt speed:
The front and rear centre section belts are driven independently by variable speed motors.
Each belt motor speed is controlled by a separate speed controller module, its between the
rails on the right hand side of the machine.
Adjust the alternate speed to achieve …………….
Issue 2,
Nov 14
T
R
R
S Advanc
e
e
d Maintena
111
nce
TRS Advanced Maintenance
112
Issue 2, Nov 14
Objective 38: Run SPC and troubleshoot if necessary
SPC Refresh:
What is SPC?
How are the Pre figures calculated?
How are the Post figures calculated?
Complete 100 test cycles on the machine to gather the SPC data.