TRS Advanced WB Intel Issue 02 - 第113页

Issue 2, Nov 14 TRS Advanced Maintenance 113 Pre-Production Setup

TRS Advanced Maintenance

112

Issue 2, Nov 14

Objective 38: Run SPC and troubleshoot if necessary

SPC Refresh:

What is SPC?

How are the Pre figures calculated?

How are the Post figures calculated?

Complete 100 test cycles on the machine to gather the SPC data.

Issue 2, Nov 14

TRS Advanced Maintenance

113

Pre-Production Setup

TRS Advanced Maintenance

114

Issue 2, Nov 14

TRP Pitch and Gap set correctly

TRP Pitch and Gap set incorrectly

TRA Pitch and Level Adjustment

To ensure the top reference plate is pulled down level to the active surround and has equal

gap, the TRP pitch and gap must be set-up. If the plate is tilted in any way then this can

result in inconsistent substrate height within the active surround.

Pitch and level adjustment is product specific. Normally, the pitch and level do not need

adjustment but in certain circumstances some adjustment may be required. The need can be

quantified by printing quality checks.

Locate the TRP pitch and gap adjusters on the machine.