TRS Advanced WB Intel Issue 02 - 第134页
TRS Advanced Maintenance 134 Issue 2, Nov 14 Objective 45: Remove and refi t left side safety cover. The left hand safety cover assembly is fitted to the side panels. With new design “safety gate assembly” protects perso…
Issue 2, Nov 14
TRS Advanced Maintenance
133
Objective 44: Locate trays in the printer.
Ten trays are fitted to prevent contamination from print medium or other foreign bodies.
Nine of the trays are located around the rising table and a protective tray is placed in the
machine after the stencil has been loaded. (For more detail see MPU 602321*1)
TRS Advanced Maintenance
134
Issue 2, Nov 14
Objective 45: Remove and refit left side safety cover.
The left hand safety cover assembly is fitted to the side panels. With new design “safety gate
assembly” protects personnel from inadvertent access to the board entry/exit ports. (For
more detail see MPU 602351*1)
Issue 2, Nov 14
TRS Advanced Maintenance
135
Objective 46: Transportation of the TRS Unit
Transit Screws and Cable Ties Removal:
• Carefully remove 2 red cable ties from the TRS arm assembly while pushing the arms
down.
• Carefully remove 2 red transit screws from the cylinder brace beam.