00194888-01_DE_EN - 第112页
Installation Manual, Station Software Version 603.01 Issue 11/2006 Finalizing the installation Note: The status only lists the programs that have just been installed. If errors occurred during installation, the status is…
Installation Manual, Station Software Version 603.01 Issue 11/2006
Installation of the vision computer software continues with the welcome screen.
Welcome screen
Fig. 4-29 Welcome screen
→ Click the Next button.
The necessary files are installed on the Vision computer.
49 of 62
Installation Manual, Station Software Version 603.01 Issue 11/2006
Finalizing the installation
Note:
The status only lists the programs that have just been installed.
If errors occurred during installation, the status is indicated by the Error button being
displayed next to the program name instead of the Ok button.
→ If you wish to read the log of the installation of any program, click the Ok (or Error) button next to the
name of the program. The Notepad is started and displays the appropriate file.
Fig. 4-30: Finalizing the installation
→ Click the Finish button.
Note:
To establish the connection between the Vision computer and the machine controller after
installation has been completed, the Vision computer, machine controller and station
computer must first be run down and the machine must then be switched off completely.
→ To do this, open the Start menu and select Programs Æ SIPLACE Æ Shutdown_Vision_MC_SR
(all).
50 of 62
Installation Manual, Station Software Version 603.01 Issue 11/2006
Fig. 4-31: Shutting down the station computer, machine controller and Vision computer
→ Switch the machine off when the computer systems have shut down.
→ Switch the machine back on again. This then reboots the Vision computer, the machine controller and
the station computer.
51 of 62