00194888-01_DE_EN - 第120页
Installation Manual, Station Software Version 603.01 Issue 11/2006 Creating a CD for updating the BIOS on an MC computer w ith CPU086: → Insert the DVD for Version 603.01 of the software in to the DVD drive of a computer…
Installation Manual, Station Software Version 603.01 Issue 11/2006
4.10.2 Preparations for installing the machine controller
→ Disconnect the USB keyboard from the station computer and connect it to the machine controller
computer.
→ Switch the video multiplexer from the station computer to the machine controller.
→ Use the USB cable to connect the external DVD drive to the machine controller computer.
→ Create the setup CD for the relevant computer type (see
Table 4-2 and section 4.3.1).
4.10.3 Updating the BIOS (optional) on a machine controller computer with CPU076 or
CPU086
When upgrading a SIPLACE X2 or X3 machine from software version 601.0x to version 603.01, it is
necessary to update the BIOS firmware on a machine controller computer fitted with CPU076 or CPU086.
This is necessary in addition to the upgrade package (see section
2.2). The BIOS firmware must also be
updated before the operating system is installed on the machine controller computer for the first time.
Creating a floppy for updating the BIOS on an MC computer with CPU076:
→ Insert the DVD for Version 603.01 of the software into the DVD drive of a computer fitted with a DVD
drive and a floppy drive.
→ Insert a formatted floppy (3.5", 1.44MB) into the floppy drive.
→ In the Windows Explorer, open the "BIOS-Images" folder on the DVD.
→ Double-click the self-extracting EXE file "CPU076_BIOS_Update.exe" and follow the instructions on
screen.
→ Once the floppy has been written, remove the floppy and the DVD from the drives.
: Updating the BIOS on an MC computer with CPU076
Note:
Before you start work, ensure that the floppy drive is set as the first boot device in the BIOS
to allow the computer to be booted from floppy.
→ Insert the floppy you have created in the floppy drive of the machine controller and boot from the
floppy by switching the machine on. The BIOS is now updated automatically.
→ After the operation has been completed, remove the floppy from the drive and carry out a warm start
of the MC computer by pressing <Ctrl><Alt><Del>.
57 of 62
Installation Manual, Station Software Version 603.01 Issue 11/2006
Creating a CD for updating the BIOS on an MC computer with CPU086:
→ Insert the DVD for Version 603.01 of the software into the DVD drive of a computer fitted with a DVD
drive and a CD-RW drive.
→ Insert an empty CD-R in the CD-RW drive.
→ In the Windows Explorer, open the "BIOS-Images" folder on the DVD.
→ Open the image file "CPU086_BIOS_Update.iso" using the installed CD writing program and follow
the instructions on screen.
→ Once the CD has been written, remove the CD and DVD from the drives.
Updating the BIOS on an MC computer with CPU086:
Note:
Before you start work, ensure that the CD-ROM drive is set as the first boot device in the
BIOS to allow the computer to be booted from CD.
→ Insert the CD you have created in the DVD drive which is connected externally to the machine
controller and boot from the CD by switching the machine on. The BIOS is now updated
automatically.
→ After the operation has been completed, remove the CD from the drive and carry out a warm start of
the MC computer by pressing <Ctrl><Alt><Del>.
4.10.4 Making the BIOS settings on the MC computer (optional)
The necessary BIOS settings are located on the setup CD for the relevant computer type (see section 4.3,
Table 4-2). This CD is used to make the BIOS settings.
Note:
Before you start work, ensure that the CD-ROM drive is set as the first boot device in the
BIOS to allow the computer to be booted from CD.
Procedure:
4.3.1
→ Insert the setup CD that you created for the relevant computer type (see section
) in the
external DVD drive connected to the MC computer.
→ Switch the machine on to boot the MC computer from CD or, if the machine is already switched on,
restart the MC computer.
→ Follow the instructions regarding the BIOS settings that appear on screen.
→ If no further activities are required on the MC computer, restore the original configuration on the MC
computer after the BIOS settings have been made (see section
4.10.5).
58 of 62
Installation Manual, Station Software Version 603.01 Issue 11/2006
59 of 62
4.10.5 Restoring the initial configuration
→ Remove the setup CD from the DVD drive.
→ Reconnect the USB keyboard to the station computer.
→ Switch the video multiplexer back to the station computer.
→ Disconnect the USB cable for the DVD drive from the MC computer.
→ Press the key combination <Ctrl><Alt><Del> to perform a warm start of the MC computer.
4.10.6 Manual installation of the machine controller software
The following step can be omitted if the station software is installed. (The MC Distributor is called during the
course of the station software installation.)
→ Open the Start menu on the station computer and choose Programs Æ SIPLACE Æ MC
Distributor (XPembedded). The installation is started.