SOM-1732-001.pdf - 第12页

Fig. 4 *2 "Alarm for Component Remainder" Group Box An alarm for component remainder can be issued according to the component remainder data which is read for each feeder . The alarm message "Alarm for Com…

8. Operation

8.1 "Opn. Mode" Tab Sheet

This tab sheet enables the operator to specify the operation mode for

the ACV system.

To use the ACV function, it is required to specify "Enable" for the ACV

function.

• Sheet Layout

When the "Opn. Mode" tab is pressed in the "OPN. MODE" window

(submenu), the corresponding tab sheet appears. Press the [Next]

button. The following tab sheet appears.

Fig. 3

*1 "ACV Function" Group Box

[Enable] Button

The ACV function becomes available.

[Disable] Button

The ACV function becomes unavailable.

When "Enable" is set for the ACV function and the ACV

checking is started, "ACV Check Mode" appears in the "Op-

erator Message" pane of the "AUTO OPN." window.

8. Operation

Note

0310-001 10 AIP01EGP

Fig. 4

*2 "Alarm for Component Remainder" Group Box

An alarm for component remainder can be issued according to the

component remainder data which is read for each feeder.

The alarm message "Alarm for Component Remainder" appears in

the "Operator Message" pane and the feeder No. related to the alarm

can be checked in the "ACV Check Status" tab sheet.

[Comp Remainder] Button

When the value under "Comp Rem" becomes smaller than the

specified one in the "ACV Check Status" tab sheet, an alarm for

component remainder is issued.

[P.C.B. Remainder] Button

When the value under "PCB Rem" (the estimated number of P.C.B.'s

which can be produced using the loaded components) becomes

smaller than the specified one in the "ACV Check Status" tab sheet,

an alarm for P.C.B. remainder is issued.

[Comp Feed Rem Tm] Button

When the value under "Feed Rem Tm" (the period of time during

which the loaded components can be supplied, that is, the time in

which the components are used up) becomes smaller than the speci-

fied one in the "ACV Check Status" tab sheet, an alarm for remain-

ing feed time is issued.

The time to be specified must be expressed in minutes.

As the time is calculated based on the time required to finish one

P.C.B., it may differ from the time in which all components are actu-

ally used up.

0310-001 11

AIP01EGP

8.1 "Opn. Mode" Tab Sheet

ACV Check Mode

[Disable] Button

No alarm for component remainder is issued.

Data Input Range

0 to 9999

Depending on the option selected in the "Alarm for Component Re-

mainder" group box, each value represents number of components,

number of P.C.B.'s, or time (minutes).

When "Enable" is set for the ACV function, the alarm func-

tion for the component remainder becomes available.

Note

0310-001 12 AIP01EGP

8.1 "Opn. Mode" Tab Sheet