00191374-04 - 第71页
Adjus t ment In str uc tio ns SI PLA CE HS- 50 4 Overview Voltages Edition 12/00 4.2 Power Supply Unit 71 9 ROW DJHVRIWKH3RZ HU6XSSO\ 8QLW Switchi ng on the ma in swi tch, t he followi ng voltages will be ge n…
4 Overview Voltages Adjustment Instructions SIPLACE HS-50
4.2 Power Supply Unit Edition 12/00
70
3RZHU6XSSO\8QLW
6XSSO\9ROWDJHV
The power supply unit is located in the left center part of the machine.
Access to this unit is prevented by a lockable door.
The power supply unit provides the following supply voltages:
– 200 VDC for the servo amplifier of the x- and y-axes.
– 100 VDC/6 VDC for the servo amplifier of the star.
– 30 VDC for the servo amplifier of the z- and dp - axes.
– 50 VDC for the DC / DC - converter in the servo unit.
– 38 VDC for the component tables and the PCB handling.
– 8 VDC for the component tables.
– 3 x 230 VAC for the motors of the lifting tables for the single and the dual conveyor (option).
– 230 VAC for die UPS of the station computer and the monitors.
For the service socket
NOTE
The service socket can be used only if the placement system is connected to the power supply
network by a 5-wire connection (L1, L2, L3, N, PE).
230 VAC (Europe) Input 3 x 400 VAC
115 VAC (USA) Input 3 x 204 VAC
220 VAC (others) Input 3 x 380 VAC
240 VAC (others) Input 3 x 415 VAC
Adjustment Instructions SIPLACE HS-50 4 Overview Voltages
Edition 12/00 4.2 Power Supply Unit
71
9ROWDJHVRIWKH3RZHU6XSSO\8QLW
Switching on the main switch, the following voltages will be generated and switched or not
switched to the modules:
9ROWDJH 0RGXOH
200 VDC servo unit unswitched
100 VDC servo unit unswitched
6 VDC servo unit switched
30 VDC servo unit switched
50 VDC servo unit switched
38 VDC component tables PCB handling switched
8 VDC component tables switched
3 x 230 VAC lifting motors unswitched
230 VAC station computer and PC switched
230 o.115 o. 265 VAC service socket independent from main switch
4 Overview Voltages Adjustment Instructions SIPLACE HS-50
4.3 Control Unit Edition 12/00
72
&RQWURO8QLW
Switching on the main switch , the DC / DC - converter in the control unit will be supplied with 50
VDC from the power supply unit. The following voltages will be generated in the control unit:
+ 5 VDC supplying the digital electronic.
± 12 VDC supplying the digital electronic.
± 15 VDC supplying the analog electronic.
+ 24 VDC supplying the control circuits, relay etc.
The measuring points are found in the detailed circuit diagram "Control unit HS-50, front view, in
chapter 3.