00198243-01_AI_BulkFeederX_XS-SX_DE EN - 第101页

3 Retrofit kit for SX-Series 3.3 Fitting the BulkFeeder X computer Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017 101 ► Fit the mounting plate in the infra…

100%1 / 148
3 Retrofit kit for SX-Series
3.3 Fitting the BulkFeeder X computer
100 Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017
3.3 Fitting the BulkFeeder X computer
NOTICE
Number of persons for assembly
If possible, 2 people should be available for the assembly.
The BulkFeeder X computer is installed in the infrastructure box at location 2. An additional holder
must be fitted for this in the infrastructure box. Proceed as follows:
► Fasten the mounting rail (1) to the mounting plate
with the screws provided (2).
► Open the inner cover (1) on the infrastructure box
in sector 4.
3 Retrofit kit for SX-Series
3.3 Fitting the BulkFeeder X computer
Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017 101
► Fit the mounting plate in the infrastructure box,
using the four threaded holes (1) marked at the
bottom rear.
► Fit the BulkFeeder X computer to the mounting
rail (1).
3 Retrofit kit for SX-Series
3.4 Inserting the cable into the machine
102 Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017
► Push the BulkFeeder X computer along its guide
rail and onto the mounting rail of the mounting
plate.
3.4 Inserting the cable into the machine
To connect the BulkFeeder X to the BulkFeeder X computer and to connect this computer to the
station computer, you need to run cables in the machine.
3.4.1 Cable for connecting the BulkFeeder X to the BulkFeeder X computer
One BulkFeeder X can be connected at each location.
●
At location 2, you can connect the BulkFeeder X directly to the BulkFeeder X computer with
the cable 03112556-xx] (length 1 m).
●
To connect the BulkFeeder X at location 1, you first need to insert the cable [03112557-xx]
(length 2 m) into the machine.
 NOTICE!
When inserting the cable, pay attention to the labeling on the cable ends to make sure
you connect correctly: "* BF *" for the BulkFeeder X; "* GigE *" for the BulkFeeder X
computer
.