00198243-01_AI_BulkFeederX_XS-SX_DE EN - 第109页

3 Retrofit kit for SX-Series 3.5 Connecting the cable Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017 109 ► Connect the LAN cable (1) at the station com- pu…

3 Retrofit kit for SX-Series

3.5 Connecting the cable

108 Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017

3.5 Connecting the cable

Connecting the BulkFeeder X computer to the station computer

The cable 03068126-xx is located in the infrastructure box of sector 4.

This cable is for the voltage supply of options such as the 3D coplan or the SIPLACE BulkFeeder.

► Connect the adapter 03147558-xx (1) to the

cable 03068126-xx.

► Fasten the yellow/green protective earth con-

ductor from the adapter 03147558-xx (1) to the

BulkFeeder X computer (2).

► Plug the connector into the connection for the

BulkFeeder X computer voltage supply (3).

► Switch the BulkFeeder X computer (4) "on".

► Connect the BulkFeeder X computer to the sta-

tion computer with the LAN cable (1) at the ter-

minal X1P1.

3 Retrofit kit for SX-Series

3.5 Connecting the cable

Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017 109

► Connect the LAN cable (1) at the station com-

puter to the additionally fitted LAN card.

Connecting the BulkFeeder X to the BulkFeeder X computer

► Connect the BulkFeeder X cable to the Bulk-

Feeder X computer.

(1) BulkFeeder X for location 1

(2) BulkFeeder X for location 2

3 Retrofit kit for SX-Series

3.5 Connecting the cable

110 Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017

Connecting the BulkFeeder X

One BulkFeeder X can be connected and operated per location. It can be placed anywhere on the

changeover table.

► Run the connection cable under the tapes.

► Connect the cable (1).

NOTICE

Non-initialization of BulkFeeder X

If the BulkFeeder X is not initialized at location 1, place the cable in the box with the pneu-

matic unit (2) for safety reasons.