00198243-01_AI_BulkFeederX_XS-SX_DE EN - 第125页

4 Retrofit kit for X-Series S 4.5 Connecting the BulkFeeder X computer to the station computer Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017 125 ► Run the…

4 Retrofit kit for X-Series S

4.5 Connecting the BulkFeeder X computer to the station computer

124 Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017

4.5 Connecting the BulkFeeder X computer to the station

computer

4.5.1 Removing the station computer

To prepare the station computer for connection of the BulkFeeder X computer, you need to remove

the station computer. To do so, proceed as follows:

► Unplug all press-fit connections to the station

computer. Mark their positions, to make clear as-

signment easier later on.

 NOTICE!

For machines with serial number > H001: the

connection (1) should be empty so that the

BulkFeeder X computer can be connected

there later. If the connection is occupied, you

will need to fit an additional LAN card in the

station computer.

► The station computer is fitted using velcro! Re-

move the station computer.

4.5.2 Inserting the cable for the power supply and LAN connection to the

BulkFeeder X computer

The cable for the power supply and the LAN connection must be inserted into the machine. To do

so, proceed as follows:

► Run the power supply cable (1) and the LAN

cable (2) via the empty installation place, from

the station computer, through the opening in the

bottom of the machine.

4 Retrofit kit for X-Series S

4.5 Connecting the BulkFeeder X computer to the station computer

Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017 125

► Run the cable through the bottom of the machine

in placement area 1 to location 4.

► Run the cable out of the bottom of the machine

from location 4 to the side cover.

► Then run the cable behind the side cover from

location 4.

4 Retrofit kit for X-Series S

4.5 Connecting the BulkFeeder X computer to the station computer

126 Assembly Instructions / Montageanleitung SIPLACE BulkFeeder X Retrofit Kit for SX Series and X Series S 07/2017

4.5.3 Connecting the cable to the BulkFeeder X computer

► Connect the cable for the power supply (1) and

the grounding (2).

► Connect the LAN cable (3).

4.5.4 Fitting the station computer

► Reposition the station computer on the velcro.

Pay attention to the position of the cable.