Vakuum Tooling AMKOR X4 OS Applikation - 第43页
Installation instructions Vacuum Tooling AM KOR (00188501-01) SIPLACE X4 / OS Application 03/2006 Edition 43 2.8.1 Compressed air supply Direct connection to th e X4 feeding area 3 is no t possible, since thi s would exc…
Installation instructions Vacuum Tooling AMKOR (00188501-01) SIPLACE X4 / OS Application
03/2006 Edition
42
2.8 Pneumatic drawing
2
Fig. 2.8 - 1 Pneumatic plan
Installation instructions Vacuum Tooling AMKOR (00188501-01) SIPLACE X4 / OS Application
03/2006 Edition
43
2.8.1 Compressed air supply
Direct connection to the X4 feeding area 3 is not possible, since this would exceed the specified
air consumption. An additional maintenance unit must therefore be installed in the pneumatic unit.
The customer must provide an additional compressed air line. 2
The maintenance unit is fitted in the feeding area 3 on a mounting plate. 2
2
2
2
2
2
2
2
Additional maintenance unit
in feeding area 3
Additional external
air connection
Installation instructions Vacuum Tooling AMKOR (00188501-01) SIPLACE X4 / OS Application
03/2006 Edition
44
Electrical wiring of the maintenance unit 2
2
Fig. 2.11 - 1 Wiring of maintenance unit
2
2