Vakuum Tooling AMKOR X4 OS Applikation - 第49页
Installation instructions Vacuum Tooling AM KOR (00188501-01) SIPLACE X4 / OS Application 03/2006 Edition 49 2.8.3 Connecting and progr amming the vacuum sensor 2 2 2 Importa nt: the vacuum measuring hose (PUN6) is fi tt…
Installation instructions Vacuum Tooling AMKOR (00188501-01) SIPLACE X4 / OS Application
03/2006 Edition
48
2
Fig. 2.12 - 3 Vacuum plate in the placement areas with vacuum control unit
2
2
2
2
2
2
2
2
Connection to
vacuum control
Vacuum control unit
Vacuum plate with
costomer board
Installation instructions Vacuum Tooling AMKOR (00188501-01) SIPLACE X4 / OS Application
03/2006 Edition
49
2.8.3 Connecting and programming the vacuum sensor
2
2
2
Important: the vacuum measuring hose (PUN6) is fitted at the 1/8“ connection. The connection for
PUN 3 is simply a vent plug. 2
2
Recommended settimgs for the existing customer PCB: 2
2
Connection between vacuum hose and vacuum measurement
Electrical connection for vacuum sensor
Vent plug
OUT1
OUT2
HYS, N.O.
HYS, N.C.
H1 = 600 mbar
A2 = 150 mbar
h1 = 0,05 mbar
b2 = 0,05 mbar
Installation instructions Vacuum Tooling AMKOR (00188501-01) SIPLACE X4 / OS Application
03/2006 Edition
50
Programming the sensor: 2
2