Vakuum Tooling AMKOR X4 OS Applikation - 第56页
SIEMENS AG 2006 All rights reserved Technische Änderungen vorbehalten Artikel-Nr.: 00195043-01 Siemens Aktiengesellscha ft Bestellung an: SIEMENS AG, Auto mation & Drives Electronics Assembly Rupert-Mayer-Strasse 44 …
Installation instructions Vacuum Tooling AMKOR (00188501-01) SIPLACE X4 / OS Application
03/2006 Edition
54
2
Fig. 2.10 - 4 Attention: The automatic width adjustment must be deactivated.
If the conveyor is moved manually, then this error message appears. The conveyor moves, even
though the vacuum tooling is fitted. 2
2
Risk of crashing. 2
2
2
2.11 Refitting the standard conveyor
– Connectors X34/X35 should be removed so that the special design is no longer present for the
machine and the software works in standard mode.
– Detach the hoses and remove the base plate from the lifting table together with the vacuum
elements.
– Disconnect the air supply to the maintenance unit.
2
SIEMENS AG 2006 All rights reserved Technische Änderungen vorbehalten
Artikel-Nr.: 00195043-01 Siemens Aktiengesellschaft
Bestellung an:
SIEMENS AG, Automation & Drives
Electronics Assembly
Rupert-Mayer-Strasse 44
D-81359 Muenchen
Printed in the Federal Republic of Germany
SIEMENS AG 2006 All rights reserved Subject to change without prior notice
Order no.: 00195043-01 Siemens Aktiengesellschaft
To be ordered from:
SIEMENSAG, Automation & Drives
Electronics Assembly
Rupert-Mayer-Strasse 44
D-81359 Muenchen
Printed in the Federal Republic of Germany