00196602-05_SM_SIPLACE_X-Feeder_EN - 第3页

3 Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017 Contents Contents 1 Introduction .. 5 1.1 Safety Instructions .. 5 1.1.1 Conventions for the Use of Safety Instructions and Symbols .. 5 1.2 Environmentally-Frien…

100%1 / 90
All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining
trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate
the rights of the owner.
We have reviewed the contents of this publication to ensure consistency with the hardware and software de-
scribed. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the informa-
tion in this publication is reviewed regularly and any necessary corrections are included in subsequent editions.
Copyright © ASM Assembly Systems Technical data subject to change
ASM
Assembly Systems GmbH & Co. KG
Rupert-Mayer-Strasse 44
81379 Munich
Germany
Item no.: 00196602-05
www.asm-smt.com Printed by ASM Assembly Systems
3Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017
Contents
Contents
1 Introduction.. 5
1.1 Safety Instructions.. 5
1.1.1 Conventions for the Use of Safety Instructions and Symbols.. 5
1.2 Environmentally-Friendly Disposal of Materials and Components.. 6
1.3 Use of Original SIPLACE Accessories and Spare Parts.. 6
1.4 Information About This Service Manual.. 6
1.5 Release History.. 6
1.6 SIPLACE on the World Wide Web (WWW).. 6
1.7 Staff Qualifications and Training.. 7
2 General.. 9
2.1 Requirements.. 9
2.2 Warranty.. 9
2.3 Equipment Required.. 10
2.4 Safety Instructions.. 10
3 X-Feeder Test Station.. 11
3.1 X Feeder Test Station Error Messages.. 12
3.2 Rare Errors.. 14
4 X Feeder Verification System.. 15
5 Diagnosis and Solutions.. 17
5.1 Assignment of Symptoms/Repairs.. 17
6 Repairing the X Feeder modules.. 19
6.1 Front sliding guide.. 19
6.1.1 Removing the Front Sliding Guide.. 20
6.1.2 Fitting the Front Sliding Guide.. 21
6.2 Rear Sliding Guide.. 21
6.2.1 Removing the Rear Sliding Guide.. 22
6.2.2 Fitting the Rear Sliding Guide.. 22
6.3 Left Side Cover.. 23
6.3.1 Removing the Left Side Cover.. 23
6.3.2 Fitting the Left Side Cover.. 24
6.4 Tape Drive.. 27
6.4.1 Pickup Window.. 27
6.4.1.1 Removing the Pickup Window (4 - 12 mm).. 27
6.4.1.2 Fitting the Pickup Window (4 - 12 mm).. 28
6.4.1.3 Removing the Pickup Window (16 - 88 mm).. 30
6.4.1.4 Fitting the Pickup Window (16 - 88 mm).. 30
6.4.2 Splice Sensor.. 31
6.4.2.1 Removing the Splice Sensor (8 - 12 mm).. 32
6.4.2.2 Fitting the Splice Sensor (8 - 12 mm).. 32
6.4.2.3 Removing the Splice Sensor (16 - 88 mm).. 33
6.4.2.4 Fitting the Splice Sensor (16 - 88 mm).. 34
4 Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017
Contents
6.4.3 Magnetic Shield (4mmX Only).. 35
6.4.3.1 Removing the Magnetic Shield.. 35
6.4.3.2 Fitting the Magnetic Shield.. 36
6.5 Foil Disposal.. 37
6.5.1 Foil Disposal Drive Assembly.. 37
6.5.1.1 Removing the Foil Disposal Drive (4 - 12 mm).. 38
6.5.1.2 Fitting the Foil Disposal Drive (4 - 12 mm).. 39
6.5.1.3 Removing the Foil Disposal Drive (16 mm).. 40
6.5.1.4 Fitting the Foil Disposal Drive (16 mm).. 42
6.5.1.5 Removing the Foil Disposal Drive (24 - 88 mm).. 44
6.5.1.6 Fitting the Foil Disposal Drive (24 - 88 mm).. 46
6.5.2 Stripping Device Foil Disposal.. 49
6.5.2.1 Removing the Stripping Device (4 mm).. 49
6.5.2.2 Fitting the Stripping Device (4 mm).. 50
6.5.2.3 Removing the Stripping Device (8-88mm).. 50
6.5.2.4 Fitting the Stripping Device (8–88mm).. 50
6.5.3 Knurled Tamp Wheel.. 51
6.5.3.1 Removing the Knurled Tamp Wheel (4 - 88 mm).. 52
6.5.3.2 Fitting the Knurled Tamp Wheel (4 - 88 mm).. 52
6.5.4 Foil Rocker.. 53
6.5.4.1 Removing the Foil Rocker (4 - 88 mm).. 54
6.5.4.2 Fitting the Foil Rocker 4 - 88 mm).. 55
6.5.5 Ratchet.. 56
6.5.5.1 Removing the Ratchet (4 - 12 mm).. 56
6.5.5.2 Fitting the Ratchet (4 - 12 mm).. 58
6.5.5.3 Removing the Ratchet (16 - 88 mm).. 59
6.5.5.4 Fitting the Ratchet (16 - 88 mm).. 61
6.5.6 Tape Disposal Flap.. 65
6.5.6.1 Removing the Flap (4–12mm).. 65
6.5.6.2 Fitting the Flap (4–12mm).. 66
6.5.6.3 Removing the Flap (16–88mm).. 66
6.5.6.4 Fitting the Flap (16–88mm).. 66
6.6 Rocker.. 67
6.6.1 Rocker Stripping Device (4mm only).. 67
6.6.1.1 Removing the Rocker Stripping Device.. 67
6.6.1.2 Fitting the Rocker Stripping Device.. 68
6.6.2 Rocker Assembly.. 68
6.6.2.1 Removing the Rocker (4 - 88 mm).. 69
6.6.2.2 Fitting the Rocker (4 - 88 mm).. 70
6.6.3 Tamp Wheel for Rocker.. 71
6.6.3.1 Removing the Tamp Wheel for the Rocker (4 - 88 mm).. 72
6.6.3.2 Fitting the Tamp Wheel for the Rocker (4 - 16 mm).. 72
6.6.3.3 Fitting the Tamp Wheel for the Rocker (24 - 88 mm).. 72
6.6.4 Bearing Shaft.. 73
6.7 Operating Panel Assembly.. 74
6.7.1 Removing the Operating Panel (4+8 mm).. 74
6.7.2 Fitting the Operating Panel (4+8mm).. 75
6.7.3 Removing the Operating Panel (12 mm).. 76
6.7.4 Fitting the Operating Panel (12 mm).. 78
6.7.5 Removing the Operating Panel (16 - 88 mm).. 81
6.7.6 Fitting the Operating Panel (16 - 88 mm).. 83
6.8 Leaf Spring.. 87
6.8.1 Removing/Fitting the Leaf Spring (4 - 12 mm).. 87
6.8.2 Removing/Fitting the Leaf Spring (16 - 88 mm).. 88