00196602-05_SM_SIPLACE_X-Feeder_EN - 第36页
6 Repairing the X Feeder modules 6.4 Tape Drive 36 Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017 6.4.3.2 Fitting the Magnetic Shield ► Place the magnetic shield on the tape drive as in- dicated. Make sure that the re…
6 Repairing the X Feeder modules
6.4 Tape Drive
Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017 35
► Hold the screw with a pair of tweezers in the front
hole.
► Fasten the front screw marked in the diagram.
► Fit the left side cover into place (see section 6.3.2 "Fitting the Left Side Cover" [}24]).
6.4.3 Magnetic Shield (4mmX Only)
Required spare parts
Magnetic shield X4
Feeder module Item no. Designation
4 mm 03087341-Sxx Magnetic shield X4
Required tools
●
Phillips screwdriver
6.4.3.1 Removing the Magnetic Shield
► Remove the pickup window 6.4.1.1 "Removing
the Pickup Window (4 - 12 mm)" [}27]).
► Remove the two screws marked in the diagram.
Use a Phillips screwdriver for this.
► Remove the magnetic shield.
6 Repairing the X Feeder modules
6.4 Tape Drive
36 Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017
6.4.3.2 Fitting the Magnetic Shield
► Place the magnetic shield on the tape drive as in-
dicated.
Make sure that the recesses on the magnetic
shield are positioned in a way to allow the cog of
the tape drive to move freely.
► Fasten the magnetic shield using the two marked
screws. Use a Phillips screwdriver for this.
► Fasten the pickup window (see 6.4.1.2 "Fitting
the Pickup Window (4 - 12 mm)" [}28]).
6 Repairing the X Feeder modules
6.5 Foil Disposal
Service Manual SIPLACE X-Feeder 4 - 88 mm 11/2017 37
6.5 Foil Disposal
6.5.1 Foil Disposal Drive Assembly
NOTICE
Checking the firmware version
After replacing the foil disposal drive, you need to check the firmware version for the feeder
module with the X-Feeder Testbox.
The firmware needs to be updated if the firmware supplied on a USB stick with the X-
Feeder Test Station has a higher version state than the firmware in the feeder module.
For a description of how to update the firmware, refer to the Job Guide "X Feeder Test Sta-
tion", item no. 00196352-xx.
NOTICE
Using the supplied USB stick
Use the USB stick supplied with the X-Feeder Test Station to check and update the firm-
ware.
Correct functionality can not be guaranteed with other USB sticks which, for example, simu-
late a drive or have high volume memory.
Required spare parts
Example: foil disposal drive 8mm
Feeder
module
Item no. Module
Version <= -06
Item no. Module
with upgrade
kit
Item no. Module
Version >= -07
Designation
4 mm 03087962-xx 03087962-xx 03087962-xx Foil disposal assembly, X4
8 mm 03042325-xx 03042325-xx 03042325-xx Foil disposal assembly, /X8
12 mm 03042419-xx 03042419-xx 03042419-xx Foil disposal assembly, /
X12
16 mm 03042357-xx 03117064-xx
03117048-xx
03117064-xx Foil disposal assembly, /
X16
24 mm 03041992-xx 03117102-xx
03117050-xx
03117102-xx Foil disposal assembly, /
X24
32 mm 03042455-xx 03117106-xx
03117051-xx
03117106-xx Foil disposal assembly, /
X32
44 mm 03042501-xx 03117108-xx
03117053-xx
03117108-xx Foil disposal assembly, /
X44
56 mm 03043390-xx 03117174-xx
03117054-xx
03117174-xx Foil disposal assembly, /
X56
72 mm 03043408-xx 03117340-xx
03117061-xx
03117340-xx Foil disposal assembly, /
X72
88 mm 03042235-xx 03117356-xx
03117062-xx
03117356-xx Foil disposal assembly, /
X88