2.VGOS V30 application software installation_upgrade manual - 第15页

For Users Serv i ce Information SI090100 2E- 003=VGOS V3 0 applicatio n software installatio n /upgrade manua l 15/24 Step 3 Start the VGOS A pplication Version Up progr am. From W indows start menu, select [Program s], …

100%1 / 24
For Users
Service Information
SI0901002E-003=VGOS V30 application software installation/upgrade manual
14/24
4 Upgrade the application software
Machine application software is upgraded to enable enhanced functions, accommodate to custom
software functions or for other reasons.
Step 1 Power on the machine and enter the Windows Mode.
Upon powering on the machine, the below window appears shortly. Click the [Windows
Mode] button before Countdown expires.
Step 2 Enter an Administrator’s password.
If a password has been registered, enter the password and click the [OK] button. If not, leave
the textbox empty and click the [OK] button.
For Users
Service Information
SI0901002E-003=VGOS V30 application software installation/upgrade manual
15/24
Step 3 Start the VGOS Application Version Up program.
From Windows start menu, select [Programs], [Vg Machine] then [VersionUp] to run the
program.
Note
When the system version is V3.00, or when other USB flash drive than the designated one
is used for application installation/upgrading, the VGOS Application Version Up program is
not selectable via the above menu selection. In this case, start the explorer and double click
“Setup.exe” in the installation image instead.
Step 4 Select an install media (source drive) and click the [Install] button.
If the machine is equipped with the CD drive, the “CD Drive” radio button is selectable.
Note
If the specified drive cannot be found, the following warning message appears. Check if the
source USB flash drive or CD is inserted properly, and click the [Install] button again.
n Machine Not equipped with CD drive
(YG12, YS series)
n Machine equipped with CD drive
(YG300)
For Users
Service Information
SI0901002E-003=VGOS V30 application software installation/upgrade manual
16/24
Step 5 Select a language for setup procedure.
Step 6 Installation wizard starts.
When installation starts properly, the following dialog appears asking you to continue the
process. Click the [Next] button.
Step 7 Check the contents of the dialog and click the [Yes] button.
Confirm USER LICENSE
AGREEMENT and select [Yes].