M3plus_OperationManual_e - 第211页
在线预览 M3plus_OperationManual_e PDF 文档。
6 -15
6
Managing the data
3. Creating XML library
When using the VGOS:
After checking and adjusting the library data in the Adjust mode, save the library data as
explained below.
1
Select "Library Name".
Line up the cursor with "Library Name" on the [Parts]-[Basic] or [Mark]-[Basic] tab.
2
Press the [Edit] button.
A dialog box appears to save the library data.
3
Press the [Save] button.
The "Parts library Save" or "Mark library Save" dialog box appears.
4
Enter the library file name.
5
Select the machine difference information.
"Library Name"
[Edit] button
[Model diff.] (machine difference) buttonEnter the library file name.
Saving the library
VGOS
27607-5E-20
6
Press the [OK] button and follow the instruction that appears on the
screen.
Table of Contents
1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
1.1 Air regulator unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
1.2 Connection between machines . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
1.2.1 PREVIOUS INTERFACE connector . . . . . . . . . . . . . . . . . . . . . . . . A-3
1.2.2 NEXT INTERFACE connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3
1.3 Power connection terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4
2. Alignment Type glossary . . . . . . . . . . . . . . . . . . . . . . . . B-5
2.1 Alignment Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5
2.1.1 Alignment Type definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-7
2.1.2 Detecting the component center and tilt . . . . . . . . . . . . . . . . . . . . B-9
2.2 Using special recognition settings . . . . . . . . . . . . . . . . . . . . . . . B-10
2.2.1 QFP recognition mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-10
2.2.2 Single connector recognition mode . . . . . . . . . . . . . . . . . . . . . . .B-10
2.2.3 4-way connector recognition mode (Con-NSEW) . . . . . . . . . . . .B-10
2.2.4 Mark recognition mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-11
2.2.5 Special rectangle (Sp. Quad) recognition mode . . . . . . . . . . . . .B-18
2.2.6 PLCC (SOJ) base recognition mode . . . . . . . . . . . . . . . . . . . . . . . B-19
2.2.7 Center-of-gravity detection (probe recognition mode) . . . . . . . . .B-21
Appendix