M3plus_OperationManual_e - 第67页
3 Creating the PCB data 3- 2 2. Registering and selecting the PCB name 2.1 Registering PCB names To create new PCB data for production, you must first register the PCB name. There are some methods for registering a PCB n…
3
Creating the PCB data
3 -1
1. Overview
The PCB data is indexed by each individual PCB name. Each PCB type consists of various information
and parameters as shown below, which can be selected or checked with the menu button and tab on
the operation screen. This section describes basic methods for creating PCB data so that you will
understand what data is needed for what item. After you have obtained a complete understanding of
these methods, begin actual work according to the desired method.
PCB name
Parts
Pick
Basic
Parts Adjust mode
Vision
Mount
Tray
Option
Shape
Shape
Vision
Basic
Mount
Board
Various parameters
Fiducial
Badmark
Offset
Board
PCB data structure
Mark
Mark Adjust mode
23401-5E-20
3
Creating the PCB data
3-2
2. Registering and selecting the PCB name
2.1 Registering PCB names
To create new PCB data for production, you must first register the PCB name. There are
some methods for registering a PCB name.
1. Registering a new PCB name
If no basic data is found in the previously registered PCB data. You should register a new PCB
name with empty data and then enter necessary data.
2. Utilizing PCB data already registered
Make a copy of PCB data which is already registered in the machine.
3. Converting CAD data or other manufacturer's mounter data
After converting CAD data or other manufacturer's mounter data into a standard format, take its
component coordinate data into the machine to create data that can be used with i-PULSE full
vision series mounters.
The following steps explain the procedure in "1. Registering a new PCB
name".
1
Press the [Create] button on the Setup screen.
The "Create Board Data" dialog box appears as shown below.
[Create] button
Select the format to save data.
[Create] button
27401-5E-20
3 -3
3
Creating the PCB data
2
Enter a PCB name in the "File name" box on the Create tab screen.
Enter a PCB name within 20 alphanumeric characters from the keyboard.
n
NOTE
A space cannot be included in a PCB name. Use underbars instead.
Enter the PCB name and press [OK].
Entering a PCB name
27402-5E-20
c
CAUTION
An alert dialog appears if a PCB data with the same name has already been registered. Register
it with another PCB name in this case. Pressing the [OK] button on the alert dialog box will
overwrite the existing PCB data.
3
Press the [OK] button.
The display returns to the Setup screen.
4
Save the new PCB data.
1.Press the [Save] button in the main menu button area.
The Save dialog box appears showing the PCB list.
2.Check the drive, folder and file type to save the PCB data and press [Save] button.
Saving the PCB data
[Save] button
[Save] button
Check that the PCB name to be saved is displayed.
27403-5E-20
n
NOTE
VIOS format data should be saved in the "No 1" folder and XML format data in the "My Programs" folder.
2. Registering and selecting the PCB name