M3plus_OperationManual_e - 第7页

在线预览 M3plus_OperationManual_e PDF 文档。

Table of Contents

1. Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i

1.1 To ensure safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i

1.2 Safety alert symbols and instructions . . . . . . . . . . . . . . . . . . . . . . . . ii

1.2.1 Types of safety alert symbols and signal words . . . . . . . . . . . . . . . . ii

1.2.2 Basic safety precautions that must be observed . . . . . . . . . . . . . . . . ii

1.3 Warning labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv

1.4 Warning label positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii

2. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . x

3. Contents of each chapter. . . . . . . . . . . . . . . . . . . . . . . . . . xi

4. Page layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii

Before using the machine

1. Safety

To ensure that the machine you purchased is used safely and correctly, always comply with the

instructions and rules in this manual regarding safety. However this manual cannot cover all items

regarding safety in detail. So it is extremely important that the operator or person handling the ma-

chine make correct decisions regarding safety.

1.1 To ensure safety

To maintain the safety of the operator or person working with this machine, it is essential

that it (including external parts feeders) be installed correctly in compliance with the

safety standards and conditions of that country.

Complying with the safety regulations and laws of that country is the responsibility of

the customer who purchased this machine. The supervisor entrusted with this machine’s

operation must take responsibility to ensure all measures have been taken to ensure

machine safety.

■ Who is the operator? Who are the service personnel?

CAUTION

Only the operator and service personnel having sufficient knowledge of this machine should

handle this machine.

Operator:

The operator is someone who has been trained by us in machine operation and has a thorough

knowledge of the machine operation manual and demonstrates adequate knowledge of machine

operation and safety.

Main tasks of the operator include pre-operation inspections, operation (component mounting) and

making setups (changeovers). The machine is only used in normal operating mode.

Service personnel:

The service personnel are those trained by us in machine maintenance as well as safety instruction

and who also demonstrate a thorough knowledge of safe handling of the machine according to the

type and location of machine operation. They must also have an understanding of hazardous sections

of the machine and residual risks.

Main tasks of service personnel include machine maintenance, repair, adjustment and management

of the system. Changes to the machine settings and operation in factory adjustment mode (service

mode) are allowed.

■ Restricting machine operation with passwords

Machine operating levels usable by the operator and service personnel (mentioned above) must be

restricted by password. This prevents the operator and service personnel from using the machine at a

higher level than allowed.