00192156-04 - 第18页

Maintenance Maintenance Instr uctions F 5 Daily maintenance jobs 03/2003 US E dition 18 5 Daily main tenance jobs 5

Maintenance Instructions F Maintenance

03/2003 US Edition 4 Maintenance schedule

Sleeves

Check the switching ring

Clean the longitudinal vacuum hole Metal drill bit, 1.4 mm

Clean the transverse vacuum hole Metal drill bit, 1.1 mm

Clean the suction plate Lint-free cloth

Clean the friction wheel Ethyl alcohol, lint-free cloth

Clean the incremental disk Ethyl alcohol, lint-free cloth

Clean the sleeve shaft Ethyl alcohol, lint-free cloth

Ball catch sleeves

Clean the circumference of the ball catch Ethyl alcohol, lint-free

cottonwool buds

Check the film

Clean the groove Ethyl alcohol, lint-free

cottonwool buds

Standard sleeves

Check the O-ring

Clean the snap-fit O-ring Lint-free cloth

Grease the snap-fit O-ring Unisilkon L250L

Valve plunger

Wipe the valve plunger with a dry cloth Lint-free cloth

Check the sealing lips, the spring O-ring and the

sleeve

Grease the valve plunger ISOFLEX TOPAS, NCA 52

Maintenance Maintenance Instructions F

5 Daily maintenance jobs 03/2003 US Edition

5 Daily maintenance jobs

Maintenance Instructions F Maintenance

03/2003 US Edition 5 Daily maintenance jobs

You will need a waste bin, a collecting container and a vacuum cleaner for the daily cleaning jobs.5

Carry out the cleaning work in the order shown in the diagram to keep periods of stoppage to a

minimum. 5

: Press the Stop button on the first station when the gantry is over the placement position.

This will stop it outside your working area. 5

: Open the protective hood.

Empty the reject bin 5

a Remove the reject bins for the Collect & Place and Pick & Place heads.

s Empty them into the collecting container.

We recommend that you empty the reject bin every day. In this way, you will be able to see whether

any components are being rejected frequently. Ascertain the cause of the fault using the track er-

ror menu or MaDaMaS (pick-up reliability). 5

d Vacuum all around the reject bin locations and then replace them in the machine.

Do not leave any loose components inside the placement machine since they could drop between

moving parts and cause malfunctions. 5