00192156-04 - 第33页
Maintenance Inst ructions F Maintenance 03/2003 US Edition 7 Monthly maintenance work 33 7 7 Y ou will need the followi ng tools, equipmen t and cons umables for the month ly maint enance : 7 – V acuum c leaner –B r u s …
Maintenance Maintenance Instructions F
7 Monthly maintenance work 03/2003 US Edition
32
7 Monthly maintenance work
7
Maintenance Instructions F Maintenance
03/2003 US Edition 7 Monthly maintenance work
33
7
7
You will need the following tools, equipment and consumables for the monthly maintenance: 7
– Vacuum cleaner
–Brush
– Slotted-head screwdriver
– Set of hexagon socket spanners
– Pallet jack
– Laboratory gloves
– Ethyl alcohol
– SIPLACE cleaning tissue (article no. 00315253-02)
– SIPLACE cottonwool buds (article no. 00352931-02)
– Clean, lint-free cloths
– Lens cleaning cloth
– ISOFLEX TOPAS, NCA 52 (article no. 00328369-01)
–WD40
– Set of clean sleeves
– Set of cleaned and lightly greased valve plungers.
7
7
Remove component trolley 7
: Open the protective hoods and push the gantry over the PCB conveyor.
7
To move the gantry, take hold of the handle and push gently and carefully. 7
7
: Remove the reject bin from inside the machine and the waste bin from beneath the changeover
table.
7
Disconnect the changeover table from the power supply as follows: 7
a Remove the round mains plug
s When the yellow indicator lamp on the changeover table goes out, remove the square data
plug
d Detach the compressed air supply for the bulk case feeder
7
: Move the pallet jack beneath the changeover table and lift it until it just touches the changeover
table.
f Loosen the hexagon socket head screws.
g Release the clamps.
Maintenance Maintenance Instructions F
7 Monthly maintenance work 03/2003 US Edition
34
7
7