00192156-04 - 第42页
Maintenance Maintenance Instr uctions F 7 Monthly m aintenance work 03/2003 US E dition 42 7
Maintenance Instructions F Maintenance
03/2003 US Edition 7 Monthly maintenance work
41
a Clean the mirrored surfaces of the camera and the glass disk using a lens cleaning cloth.
: Insert the glass disk once more.
: Insert the top part of the IC camera.
When you insert the top part of the IC camera, make sure that it lies flat against the bottom part
and does not move.
7
Clean the FC camera
s Remove the top part of the FC camera in the same way.
d Clean the mirrored surfaces of the FC camera.
: Insert it again as described above.
7
Clean the coplanarity module 7
f Use lens cleaning paper to clean the lenses of the coplanarity module.
7
7
Clean the guides for the protective hoods 7
g Use a brush dipped in ethyl alcohol to clean the guides for the protective hoods.
: Grease the protective hood guides using a brush and ISOFLEX TOPAS NCA 52.
h Close and open the protective hoods to distribute the grease evenly.
7
7
7
7
7
7
Maintenance Maintenance Instructions F
7 Monthly maintenance work 03/2003 US Edition
42
7
Maintenance Instructions F Maintenance
03/2003 US Edition 7 Monthly maintenance work
43
SIPLACE 80 F
4
7
Maintain the electric empty tape cutter 7
7
a The used tape cutter is free. Remove the cover.
7
s Vacuum the used tape cutter's linear guide.
7
d Clean the linear guides thoroughly over their entire length using the SIPLACE cleaning tissue.
f Use a lint-free cloth to remove any stubborn dirt from the linear guide.
: Oil and preserve the linear guides using a fresh SIPLACE cleaning cloth.
7
g Use WD 40 to preserve the cutting wheel.
Be careful not to cut yourself on the cutting wheel. It is extremely sharp. 7
7
7
7
: Replace the guard over the cutter.
7
7
7
7
7
7
7
7
7