00192156-04 - 第45页
Maintenance Inst ructions F Maintenance 03/2003 US Edition 7 Monthly maintenance work 45 a Oil and pres erve th e linear gui des usi ng a fres h SIPLAC E cleani ng cloth . : Replace the g uard over the cutter . 7 s Use a…
Maintenance Maintenance Instructions F
7 Monthly maintenance work 03/2003 US Edition
44
7
Maintenance Instructions F Maintenance
03/2003 US Edition 7 Monthly maintenance work
45
a Oil and preserve the linear guides using a fresh SIPLACE cleaning cloth.
: Replace the guard over the cutter.
7
s Use a lint-free cloth dipped in ethyl alcohol to clean the contact surfaces, both inside the ma-
chine and on the changeover table.
: Preserve the contact surfaces using a lint-free cloth sprayed with WD40.
7
7
: Reverse the order described above to return the changeover table to the machine.
Make sure that the locating pins on the changeover table holders slide into their holes in the
changeover table.
7
: Fix the changeover table in position using the tensioners and socket-head cap screws, then
connect up the machine again in the following order:
1. Compressed air supply for the bulk case feeder
2. Rectangular data connector
3. Round main power plug.
7
7
: Close the protective hood.
: Repeat these tasks in all the feeder areas.
: Switch the placement machine on at the main switch.
7
7
7
7
7
7
7
Maintenance Maintenance Instructions F
8 2-monthly maintenance work 03/2003 US Edition
46
8 2-monthly maintenance work
8