00192156-04 - 第51页
Maintenance Inst ructions F Maintenance 03/2003 US Edition 8 2-monthly maintenance work 51 Inspect or replace the silen cer for th e Pick & P lace head 8 a T urn the sil encer for the Pick & Place h ead co unterc…
Maintenance Maintenance Instructions F
8 2-monthly maintenance work 03/2003 US Edition
50
8
Maintenance Instructions F Maintenance
03/2003 US Edition 8 2-monthly maintenance work
51
Inspect or replace the silencer for the Pick & Place head 8
a Turn the silencer for the Pick & Place head counterclockwise to remove.
s Remove the filter from the casing and check for dirt.
: Replace the entire vacuum generator for the Pick&Place head, if the filter is dirty.
Make sure that the plastic thread of the silencer is straight. 8
8
8
Clean and grease the toothed belts for the X, Y and Z axes 8
: Clean the toothed belts for the X, Y and Z axes.
8
d Grease the toothed belt for the Y axis using a short-bristled brush dipped in ISOFLEX TOPAS
NCA 52.
f Grease the toothed belt for the X axis using a short-bristled brush dipped in ISOFLEX TOPAS
NCA 52.
g Grease the toothed belt for the Z axis using a short-bristled brush dipped in ISOFLEX TOPAS
NCA 52.
: Move the axes backward and forward to distribute the grease evenly over the toothed belts.
8
8
8
8
8
8
8
8
8
Maintenance Maintenance Instructions F
8 2-monthly maintenance work 03/2003 US Edition
52
8