00192156-04 - 第94页
Maintenance Maintenance Instr uctions F 11 Maintain the s leeves 03/2003 US E dition 94 11
Maintenance Instructions F Maintenance
03/2003 US Edition 11 Maintain the sleeves
93
a Clean the sleeve shaft using a lint-free cloth moistened with ethyl alcohol.
11
Ball catch sleeves 11
s Clean the circumference of the ball catch with a lint-free cottonwool bud moistened with ethyl
alcohol.
11
d Check the inside film for damage.
11
f Clean the groove using a lint-free cottonwool bud moistened with ethyl alcohol.
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
Maintenance Maintenance Instructions F
11 Maintain the sleeves 03/2003 US Edition
94
11
Maintenance Instructions F Maintenance
03/2003 US Edition 11 Maintain the sleeves
95
Standard sleeves 11
a Check that the O-ring is lying closely against the sleeve. Replace the O-ring if it is too far away
or damaged.
11
s Clean the snap-fit O-ring with a lint-free cloth.
s Grease the O-ring by rubbing with Unisilkon L250L (ideally between your fingers). Then care-
fully pull the O-ring over the suction plate and into the groove.
Check that the O-ring is seated firmly in the groove.
Do not remove the O-ring in order to grease it, since this will stretch it and make it unusable. 11
11
11
11
11
11