DEK TQ Technical Specification - 第8页

8 DEK TQ Machine St andard Conf iguration Technical Data Services Mains Supply P ower Supply V oltage 11 0 Volts to 2 3 0 Volt s ±10%. Sing le phase 50/60 Hz Maximum Curr ent at 110V 15.2 Amps with i nternal vacu um pump…

DEK TQ

Machine Standard configuration

Technical Data

Vision

Vision System

SFF

Fiducials

Fiducial Types

Synthetic fiducial library or unique pattern recognition

Fiducial Size

0.3mm to 3mm

Fiducial Locations

Anywhere on substrate

Camera Lighting

Software controlled programmable LED lighting

Chase

Stencil Frame Sizes

29” x 29” / 23” x 29” / 23” x 23” / 650mm x 550mm /

600mm x 550mm

Stencil Frame Thickness

40mm to 10mm (adapter required below 25mm)

Image Position

Front

Centre

Operating Environment*

Temperature

10° to 35°C (50° to 95°F)

Humidity

30% to 70% relative humidity (non-condensing)

Altitude

Maximum 2,000 metres (6,500 feet)

Location

Internal only, not suitable for wet locations

*as described in the IPC Standard J-STD-001G-Reqirements for Soldered Electrical and Electronic

Assemblies Section 4 with respect to the following:

• Facilities - Cleanliness and ambient environments in all work areas be maintained at levels that

prevent contamination or deterioration of tools, materials, and surfaces to be soldered or

conformally coated. Eating, drinking, smoking, including use of e-cigarettes, and/or use of

tobacco products be prohibited in the work area.

• Environmental Controls - The soldering facility (controlled work area) be enclosed, temperature

and humidity controlled, and maintained at a positive pressure.

• Controlled Work Area (CWA) For the purpose of this statement, a Controlled Work Area

(CWA) is defined as an enclosed assembly / processing area maintained to a high degree of

shop cleanliness, environmental control, and foreign object debris (FOD) mitigation, either by

process or procedure, to limit the entry of contamination.

DEK TQ

Machine Standard Configuration

Technical Data

Services

Mains Supply Power Supply Voltage

110 Volts to 230 Volts ±10%. Single phase 50/60 Hz

Maximum Current at 110V

15.2 Amps with internal vacuum pump

6.6 Amps without internal vacuum pump

Maximum Current at 230V

9.2 Amps with internal vacuum pump

4.6 Amps without internal vacuum pump

Over Current Protection at 110V

The following external circuit breaker is required to be

fitted in line with the machine supply:

With internal vacuum pump -16 Amps

Without internal vacuum pump – 8 Amps

Over Current Protection at 230V

The following external circuit breaker is required to be

fitted in line with the machine supply:

With internal vacuum pump -10 Amps

Without internal vacuum pump – 6 Amps

Compressed Air Supply

To ISO 8573.1 Standard Quality Class 2.3.3

Pressure 4.5 bar to 8 bar

General usage 5 litres / minute at 5 bar to 8 bar

Maximum usage 226 litres/minute at 6 bar

Shipping Information

Approximate Weight

1110kg boxed (dependent upon configured options

selected with machine)

905kg unboxed (dependent upon configured options

selected with machine)

Approximate Dimensions

1300mm x 1000mm x 1600mm High

Certification

Specification

2006/42/EC

2014/30/EU

2011/65/EU

Subsequent amendments

Acoustic Noise Level

Less than 70dB 2003/1/EC

Certified wet print accuracy

Accuracy Verification (AVS)

DEK TQ

Machine Productivity Options

Technical Data

Process

Print Method

Paste Dispenser

Solder Jar Dispenser

Paste Roll Height Monitor (PRHM)

Stencil Mount

Frame variants – ASM Factory set to accommodate

frame sizes 736.6mm (29 Inch), 584.2mm (23 Inch),

650mm, 600mm.

Image position: Centre / Front

Clamping

Foil-less clamps – (automatic board thickness

adjustment)

All Purpose Clamping (APC)

Substrate Support

Venturi Vacuum

Flexible High Flow Vacuum (HFV)

Software & Communications

Remote SMART Factory (RSF)

Statistical Process Control (SPC)

On board, reported via operator interface (QC-CALC)

Data Capture

Software & Communications

Verification and Traceability

Handheld barcode reader

Remote barcode reader

Camera barcode reader

SMART Factory Integration

Software & Communications

IPC-Hermes -9852

ASM OIB

IPC CFX

Closed-loop-to-SPI

Connection to ASM Process Expert

ASM Offline Printer Programming