182049 Viking Installation Manual - 第20页
semi automatic SERVICES REQU IRED MACHINE FOOTPRINT 3.4 Installatio n Manual Chapt er Issue 1 Oct 02
semi automatic
SERVICES REQUIRED
MACHINE FOOTPRINT
Chapter Issue 1 Oct 02 Installation Manual 3.3
MACHINE FOOTPRINT
CAUTION
OVER CURRENT PROTECTION.
Magnetic/thermal over current protectors protect
the machines internal wiring and components
from overheating/fire during fault conditions.
DEK require additional machine supply protection
with the fitment of a wall mounted circuit breaker
rated to 16 Amps and conforming to
national/federal regulations.
NOTE
All measurements in metric
All dimensions shown with maximum board
transfer height of 980mm
Board transfer height: 820mm / 980mm
Screen load height: 905mm / 1065mm
View on Front
85
NOMINAL
145
1314
1149
1065
1093
1032
1452
View on Right Hand Side
61
1490
1284
1548
1433
320
1609
semi automatic
SERVICES REQUIRED
MACHINE FOOTPRINT
3.4 Installation Manual Chapter Issue 1 Oct 02
semi automatic
UNPACKING INSTRUCTIONS
INTRODUCTION
Chapter Issue 1 Oct 02 Installation Manual 4.1
CHAPTER 4 UNPACKING INSTRUCTIONS
INTRODUCTION
General To ensure the machine is not damaged during transportation certain machine
components are removed prior to dispatch, wrapped and packed separately.
The machine mounting feet are removed at dispatch and replaced with trans-
portation studs, the machine is secured to the base of the transportation box
with nuts and washers. The studs, nuts and washers are replaced on the
machine assembly by the mounting feet.
Unpacking The lids of the transportation boxes are secured with screws. Remove the box
lids and the sides of the large box only. Remove all loose items from the boxes.
Remove the wrapping from around the machine, remove the loose items from
their bags or wrappings.
CAUTION
RED TRANSIT BRACKETS.
Do not remove the red transit brackets attached
to the machine until the machine has been moved to its designated
position.
Machine
Components
Ensure the following machine components, removed for transportation are
complete and correct:
NOTE
Quantities may vary, depending on customers requirements.
Item Yes No
Machine Mounting Feet
Paste Dispenser Nozzle (if paste dispenser option fitted)
500g Paste Cartridge Sleeve (optional)
Paste Dispenser Drip Tray (if paste dispenser option fitted)
Squeegee Paste Drip Tray
Squeegees (if applicable)
ProFlow Unit (optional)
Monitor
Monitor Stand and Ergo Arm Mount
Keyboard/Mouse Unit
Magnetic Tooling Pins
Manifold (if TCU fitted)
Transport Rail Assembly