182049 Viking Installation Manual - 第50页

semi automatic MACHI NE PREPARAT ION SHOCK WATC HES 5.24 Instal lation Manual Chapter Issue 1 Oct 02 SHOCK W A TCHES A self adhesi ve shock watch (DEK Part No. 133517), is fitt ed in the vertical plane on the machine in …

100%1 / 86
semi automatic
MACHINE PREPARATION
MACHINE LEVELLING
Chapter Issue 1 Oct 02 Installation Manual 5.23
Initial Levelling When the correct height of the machine has been achieved, the four feet should
now be adjusted for correct level.
1. Place an engineering level on the tooling base plate facing Left (L) - Right
(R) or Back (B) - Front (F).
2. By carefully adjusting each of the four feet individually, level the machine so
that in each direction, Left (L) - Right (R) and Back (B) - Front (F), 0.004" per
foot (0.32mm/metre) is achieved.
3. Lock the feet using the locknuts on the adjusters.
Figure 5-11 Machine Levelling
Isometric View Showing Levelling of Tooling Base Plate
Tooling Base Plate
Engineering Level
Adjustable Mounting Feet
(4 positions)
semi automatic
MACHINE PREPARATION
SHOCK WATCHES
5.24 Installation Manual Chapter Issue 1 Oct 02
SHOCK WATCHES
A self adhesive shock watch (DEK Part No. 133517), is fitted in the vertical
plane on the machine in four places (Shock Watch Locations figure refers).
Check if the shock watches have been triggered, the indicator shows red, ('Drop
N Tell' Shockwatch figure overleaf refers).
NOTE
The machine should be fitted with four untriggered shock watches at all times.
Figure 5-12 Shock Watch Locations
Figure 5-13 Drop N Tell Shockwatch
Machine PC Machine Controller
Camera
Chase
NOTE
Shock Watches (4 positions)
shown circled
semi automatic
MACHINE PREPARATION
SHOCK WATCHES
Chapter Issue 1 Oct 02 Installation Manual 5.25
Chase Shock
Watch
If the chase shock watch has triggered, visually inspect the chase is level to the
table.
Camera Shock
Watch
If the camera shock watch has triggered, ensure that the camera is secure and
level on the camera mount (refer to Technical Reference Manual).
Machine PC Shock
Watch
If the machine PC shock watch has triggered, visually inspect the inside of the
PC and ensure that the cards are seated correctly.
Machine Controller
Shock Watch
If the machine controller shock watch has triggered, visually inspect the
machine controller to ensure that the cards are seated correctly.
Shock Watch
Replacement
On completion of corrective action, replace any triggered shock watches.
NOTE
The machine should be fitted with four untriggered shock watches at all times.