182049 Viking Installation Manual - 第53页

semi automatic POWER UP SEQUENCE GENE RAL Chapter Issue 1 Oct 02 Instal lation Manual 6.1 CHAPTER 6 POWER UP SE QUENCE GENERAL Before the machi ne is powered up, a fi nal check is requir ed to ensure proper inst allation…

semi automatic

MACHINE PREPARATION

SHOCK WATCHES

5.26 Installation Manual Chapter Issue 1 Oct 02

semi automatic

POWER UP SEQUENCE

GENERAL

Chapter Issue 1 Oct 02 Installation Manual 6.1

CHAPTER 6 POWER UP SEQUENCE

GENERAL

Before the machine is powered up, a final check is required to ensure proper

installation. When fully satisfied that all instructions and preparations have been

carried out as detailed in the Machine Preparation chapter, proceed with the

power up checks detailed in this chapter.

Electrical Services Check the following electrical services are available:

The machine transformer must be tapped to the nearest selectable voltage

within the following limits:

• 100V, 110V and 120V ±5%

• 200V, 210V, 220V, 230V and 240V ±2.5%

CAUTION

VOLTAGE CONFIGURATION.

The factory set voltage configuration may

differ from the customers own supply.

- Ensure correct transformer configuration is used

- Ensure that the machine serial plate is annotated correctly

- Ensure filtration unit (if fitted) is voltage compatible

NOTE

For information on the filtration unit, Machine Relocation section of the Machine

Preparation chapter of this manual refers. Refer to Technical Reference

Manual, Power Supply and Distribution chapter for more detailed information.

Detail Voltage

Measured Customer/Factory electrical supply

Detail Accept Reject

Check dispatch documentation and serial number plate on rear

of machine matches supply

semi automatic

POWER UP SEQUENCE

MACHINE POWER UP SEQUENCE

6.2 Installation Manual Chapter Issue 1 Oct 02

MACHINE POWER UP SEQUENCE

Hard Disk Check

1. Connect the mains supply to the machine.

2. Turn the Mains Isolation Switch ON.

NOTE

If the machine hard disk is corrupt, carry out the NT recovery procedure

detailed in the Housekeeping chapter of the User Manual.

Checking Hard Disk

Partition C

4. Carry out the following:

a. On completion of ‘auto login’, minimise the DEK program.

b. Using the mouse, click on the Start button on the taskbar. The Start Menu

is displayed.

c. Click on the Run icon.

Detail Accept Reject

Check the machine hard disk for any defects caused in

transit using Chkdsk.