182049 Viking Installation Manual - 第8页
semi automatic MANU AL CHAN GE RE QUES T FORM Instal lation Manual CUSTOMER USE ORIGINA TOR Name & Department Position T elephone No. Email Fax No. Model Number Software V ersion Machine Serial No. T itle Chapter / I…
semi automatic
MANUAL INFORMATION
Installation Manual
MANUAL INFORMATION
Quality Manager
DEK Printing Machines Ltd
11 Albany Road
Granby Industrial Estate
Weymouth
Dorset
DT4 9TH
England
Tel: +44 1305 760760
Fax: +44 1305 760123
INFORMATION IN THIS MANUAL IS SUBJECT TO CHANGE WITHOUT
NOTICE.
NO PART OF THIS MANUAL MAY BE REPRODUCED, TRANSMITTED
IN ANY FORM OR MEANS, ELECTRONICALLY OR MECHANICALLY,
INCLUDING PHOTOCOPYING AND RECORDING, FOR ANY PURPOSE
WITHOUT THE EXPRESS WRITTEN PERMISSION OF DEK PRINTING
MACHINES LTD.
EVERY EFFORT HAS BEEN MADE DURING THE COMPOSITION OF
THIS MANUAL TO ENSURE THAT THE INFORMATION HAS BEEN
CLEARLY PRESENTED AND CORRECT IN ALL RESPECTS.
IF DURING THE USE OF THIS MANUAL, ERRORS OR OMISSIONS
ARE FOUND, OR THE READER CONSIDERS THAT IMPROVEMENTS
ARE NECESSARY TO OVERCOME ANY AMBIGUITY OR INACCURACIES,
A OF THE MANUAL CHANGE REQUEST FORM SHOULD BE
COMPLETED AND EITHER FAXED OR FORWARDED TO THE ADDRESS
BELOW, ACCOMPANIED WITH A OF THE RELEVANT PAGE
AND/OR FIGURE OF THE MANUAL WITH THE RECOMMENDATION.
COPY
COPY
semi automatic
MANUAL CHANGE REQUEST FORM
Installation Manual
CUSTOMER USE
ORIGINATOR
Name & Department
Position
Telephone No.
Email
Fax No.
Model Number
Software Version
Machine Serial No.
Title
Chapter / Issue State
Page No. / Figure No.
Company
MACHINE TYPE
DETAILS OF CHANGE
ACCEPTED
DETAILS OF CHANGE
MANUALS AFFECTED
ACTION COMPLETE
Date:Author: Customer informed
of action taken:
MANUAL
DEK USE
DATE:
Log No.
YES NO Reason:Priority:
immediate
next release
Tech Refs User Install. S/AloneEng Spec GA/Ccts Other
semi automatic
INTRODUCTION
GENERAL
Chapter Issue 1 Oct 02 Installation Manual 1.1
CHAPTER 1 INTRODUCTION
GENERAL
To prevent damage to the machine whilst unpacking or during machine power
up it is essential to read and adhere to the procedures and sequences detailed
in the Installation Manual and to ensure the correct method of unpacking and
assembly of the machine, machine preparation and power up sequences are
carried out prior to the normal running operations of the machine.
Authorized
Personnel
Only DEK authorized personnel may carry out the procedure detailed in this
document.
Chapter 2 Safety Features, describes the features on the machine that provide operator
safety whilst the machine is in operation.
Chapter 3 Services Required, describes the services needed for the machine to function
correctly. A view of the service panel showing the external connections to the
services and positioning of the circuit breakers is also shown.
Chapter 4 Unpacking Instructions, describes the method of dismantling and unpacking the
transit boxes, checking the machine, loose items and documentation. Checking
the machine configuration against customer requirements, assembling the
loose items to the machine and transportation of the machine to its designated
area.
Chapter 5 Machine Preparation, describes the method of transporting the machine into
position, removal of transit brackets, fitting the external services, adjusting the
height and levelling the machine in preparation for machine power up.
Chapter 6 Power Up Sequence, describes the sequence of machine power up and
checking of home sensor positions, system calibrations and settings, and new
product setup using a test board.
Chapter 7 Machine Performance, details the method of checking the machine perform-
ance with the customers board for alignment.
Chapter 8 Installation Documentation, describes the installation and acceptance docu-
mentation that accompanies the machine.