YSM10_Mainte_E - 第52页
1-9 1 Maintenance 2.2 Replaceable par ts T he replacement parts shown in this manual are for parts which could cause mac hine stops due to the breakdown or the life expiration. No mac hine adjustments are required after …
1-8
1
Maintenance
Consumable parts (main unit/base)
Optional purchase parts
Conveyor belt
Air filter Oil mist filter
Element assembly
Filter element
Air/mist filter
Conveyor belt
Air intake filter
* 2 each for front
Air intake filter (Machine front side)
Air intake filter
(Machine rear side)
Air intake filter (Control box)
53102-KMG-00
1-9
1
Maintenance
2.2 Replaceable parts
The replacement parts shown in this manual are for parts which could cause machine stops due to the
breakdown or the life expiration. No machine adjustments are required after replacing these parts.
2.2.1 Head unit
Replaceable parts
HM head (figure shows the cover, connector, and air hose detached)
Bit cap
Muffler
Filter cap
Ejector set (spare)
Shaft blow valve
Blow valve
Operation valve
53103-KMG-00
Name Part name Part No. Note
Blow valve VALVE KLF-M7152-00X For ejector blow
Operation valve VALVE KLF-M7153-00X For ejector vacuum generation
Bit cap BIT CAP KLW-M7156-00X
Muffler MUFFLER KLW-M715A-00X Muffler inside the bit cap
Shaft blow valve VALVE KLW-M7158-00X
Filter cap FILTER CAP KLW-M7155-00X
Spare ejector EJECTOR KLW-M7157-10X Valve and ejector unit for one head
n
NOTE
The figure above shows the example of HM head. However, HM5 head also uses the same replaceable parts.
c
CAUTION
The part Nos. given in this manual are the original part Nos. which were assigned to the parts when this manual was
issued. Because these part Nos. may be changed without prior notice, be sure to verify the latest part Nos. before
ordering parts.
1-10
1
Maintenance
2.3 Maintenance tools
2.3.1 Cleaning tools
Cleaning tools
Parts supplied with machine
Nozzle cleaning wire
Feeder plate cleaning brush
Nozzle tip cleaning tape
53104-KMG-00
n
Cleaning tools
Parts supplied with machine
Name Part name Part No. Note
Nozzle cleaning wire NEEDLE ASSY KV8-M8883-A0X
Nozzle tip cleaning tape TAPE, CLEANER KGT-M8895-00X Double-sided tape
Feeder plate cleaning brush BRUSH, FEEDER KV7-M8820-20X
Hook for cleaning brush HOOK KGA-M13B9-00X
c
CAUTION
The part Nos. given in this manual are the original part Nos. which were assigned to the parts when this manual was
issued. Because these part Nos. may be changed without prior notice, be sure to verify the latest part Nos. before
ordering parts.
n
NOTE
Nozzle tip cleaning tape (double-sided tape) is used for nozzle tip cleaning. Clean the nozzles with an ultrasonic
cleaner (option) or absolute ethanol and then clean them with the tape.