00191021-02 - 第104页
User’s Manual Test Program S ITEST Software Version 403.xx Edition 12/97 3 - II
User’s Manual Test Program SITEST
Software Version 403.xx Edition 12/97
3 - I
Contents
Page
Calibration Functions
3.1 Preparation for the Performance of the Calibration Functions . . . . . . . . . . . . . . . . . . . . 3 - 3
3.2 Complete Calibration of the Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 5
3.3 PCB Camera Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 7
3.4 RV Camera Calibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 - 9
3.5 Calibration of the Machine Zero Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 11
3.6 Verification of the Calibration Tool Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 13
3.7 Calibration of the RV Nozzle Changer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 15
3.8 Calibration of the IC Nozzle Changer (SIPLACE 80F4) . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 19
3.9 Calibration of the IC Camera (SIPLACE 80F4). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 21
3.10 Calibration of the Flip-Chip Camera (SIPLACE 80F4). . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 23
3.11 Calibration of the Coplanarity Laser Module (SIPLACE 80F4). . . . . . . . . . . . . . . . . . . . 3 - 25
3.12 Measuring the Position of PCB Reference Corner I
(and that of PCB Reference Corner II) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 27
3.13 Measuring the Pick-Up Positions of Tracks 1 and 120 . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 31
User’s Manual Test Program SITEST
Software Version 403.xx Edition 12/97
3 - II
User’s Manual Test Program SITEST 3 Calibration Functions
Software Version 403.xx Edition 12/97
3 - 1
3 Calibration Functions
NOTE
The heads and gantries must be referenced prior to the performance of the calibration functions.
For a complete calibration of the machine, the test program offers the possibility to start all calibration func-
tions from the "Calibrate entire machine" setting box with the aid of the Calibrate machine... functions (see
section 3.2, Fig. 3.2.1).
However, it is also possible to start the calibration functions individually from the corresponding displays. The
functions for the placement station SIPLACE 80S-20 must be performed on both
gantries.
A complete description of the performance of the individual calibration functions is contained in the respective
sections of this chapter.