00191021-02 - 第13页

User’s Manual Test Program S ITEST 0 Introduction to t he User Interface of the Test Program Software Version 403.xx Edition 12/97 0.2 Components of the User Interface 0 - 9 – Cycle mode... Alt+t This causes the set ting…

0 Introduction to the User Interface of the Test Program User’s Manual Test Program SITEST

0.2 Components of the User Interface Software Version 403.xx Edition 12/97

0 - 8

0.2.1 Menu Bar

The menu bar of the main view display contains the menus "Mode", "View", "General functions", "Settings"

and "Help". All other displays do not contain the menus "Mode" and "Settings".

The "Help" menu contains the same menu commands in all displays (see sections 0.3.1 through 0.3.10).

NOTE

Some menu commands are followed by codes of function keys (e.g.

) or key combinations (

) by

means of which the individual menu commands can be executed as well.

0.2.1.1 "Mode" Menu

This menu is exclusively displayed in the main view screen. The menu contains only one menu command by

means of which the termination of the test program can be initiated.

–

EXIT Alt+F4

●

Details on how to proceed are contained in section 0.1.2.

0.2.1.2 "View" Menu

Each of the menu commands contained in this menu permits you to switch to a different display. The menu

commands vary depending on the currently selected display (see sections 0.3.1 through 0.3.10). They always

correspond to the buttons in the toolbar. Thus, the operator is provided with the possibility of executing the

menu commands via the menu, the toolbar buttons, or by means of the function keys displayed on the menu.

Example:

–

Error F2

●

Click on

View

-->

Error

, or press function key

The user interface switches to the "Error" display (see section 0.3.2, Fig. 0.3.3).

0.2.1.3 "General functions" Menu

This menu contains the menu commands by means of which the screen display can be switched to the indi-

vidual cameras available on the machine, as required. Moreover, the cycle mode can be activated or deacti-

vated as well.

–

Test functions...

This menu command is in this current version of the test program not functional.

User’s Manual Test Program SITEST 0 Introduction to the User Interface of the Test Program

Software Version 403.xx Edition 12/97 0.2 Components of the User Interface

0 - 9

–

Cycle mode... Alt+t

This causes the settings box for switchover to the cycle mode to open.

●

Details on how to proceed are contained in chapt. 1, section 1.4.

NOTE

The following 4 menu commands will vary depending on the machine type.

Machine type SIPLACE 80S-20

–

PCB camera P2 ALT+3

To switch the screen display to the PCB camera on gantry 2.

–

RV camera P2 ALT+4

To switch the screen display to the camera on revolver head 2.

–

PCB camera P1 ALT+5

To switch the screen display to the PCB camera on gantry 1.

–

RV camera P1 ALT+6

To switch the screen display to the camera on revolver head 1.

Machine type SIPLACE 80F

–

PCB camera ALT+5

To switch the screen display to the PCB camera on the gantry.

–

RV camera ALT+6

To switch the screen display to the camera on the revolver head.

–

IC camera ALT+7

To switch the screen display to the IC camera.

–

Flip-chip camera ALT+8

To switch the screen display to the flip-chip camera.

NOTE

Press the

ESC

key to switch the screen display back to the normal test program mode.

0 Introduction to the User Interface of the Test Program User’s Manual Test Program SITEST

0.2 Components of the User Interface Software Version 403.xx Edition 12/97

0 - 10

0.2.1.4 "Settings" Menu

This menu is only displayed in the main view screen and contains menu commands for setting the access level

and the language, for saving and copying MA data, and for editing the machine configuration.

–

Access level

This menu command allows you to set the access level so as to permit access to given functions of the

test program only to specially trained personnel.

The access levels "Service (customer)" and "Service (Siemens)" can be selected.

Details on how to proceed are contained in chapt. 1, section 1.2.

–

Save machine data

This menu item can only be selected if MA data were newly determined or modified.

●

Details on how to proceed are contained in chapt. 1, section 1.7.1.

–

Save WPC machine data

This menu item can only be selected if the MA data for the wafflepack changer were newly determined or

modified.

●

Details on how to proceed are contained in chapt. 1, section 1.8.

–

Copy machine data

This command allows you copy MA data from the hard disk to diskette, or from diskette to the hard disk.

●

Details on how to proceed are contained in chapt. 1, section 1.7.2.

–

Machine configuration...

This command allows you to display and change, if required, the current machine configuration.

●

Details on how to proceed are contained in chapt. 1, section 1.3.

–

Language

This menu command allows you to select the language in which the texts of the user interface are to be dis-

played. The languages you can select from are German, English, French and Italian.

●

Details on how to proceed are contained in chapt. 1, section 1.1.