00191021-02 - 第135页

User’s Manual Test Program S ITEST 3 Calibration Functions Software Version 403.xx Edition 12/97 3.13 Measuring the P ick-Up Positions of Tracks 1 and 120 3 - 31 3.13 Me asuring t he Pick-Up Positions of Tracks 1 an d 12…

3 Calibration Functions User’s Manual Test Program SITEST

3.12 Measuring the Position of PCB Reference Corner I (and that of PCB Reference Corner II) Software Version 403.xx Edition 12/97

3 - 30

User’s Manual Test Program SITEST 3 Calibration Functions

Software Version 403.xx Edition 12/97 3.13 Measuring the Pick-Up Positions of Tracks 1 and 120

3 - 31

3.13 Measuring the Pick-Up Positions of Tracks

1 and 120

NOTE

Verify that the calibration data for segment offset

(RV-PCB camera offset), PCB camera and machine zero

point have already been determined.

●

Place the setting gauge onto track 1 or 120 of the component table to be measured.

NOTE

Prior to the measuring operation, check the component table surface underneath the setting gauge for

any unevenness or contamination.

●

In the main view click on the icon or to switch the screen display to the "Table" display (see

Fig. 0.3.9) of the desired component table.

●

Click on the icon to switch to the "Pick-up position track 1 and track 120" display.

Fig. 3.13.1 "Pick-up position track 1 and track 120" Display

Current value

Old value

0.001 (0.001)

3 Calibration Functions User’s Manual Test Program SITEST

3.13 Measuring the Pick-Up Positions of Tracks 1 and 120 Software Version 403.xx Edition 12/97

3 - 32

●

Depending on the position of the setting gauge on the component table, click on the

Calibrate

button

in the "Track 1" field or in the "Track 120" field. The calibration of the selected track is performed.

The position values for x and y are displayed in the "Track 1" or the "Track 120" field.

●

Proceed in the same way for the other track.

●

Perform the steps described above also for the other component table.

●

Click on the icon to return to the main view.