00191021-02 - 第142页

4 Mapping User’s Manual Test Program S ITEST 4.1 Preparatory Steps for the Mapping Operation Software Version 403.xx Edition 07/97 4 - 4

User’s Manual Test Program SITEST 4 Mapping

Software Version 403.xx Edition 07/97 4.1 Preparatory Steps for the Mapping Operation

4 - 3

4.1 Preparatory Steps for the Mapping Operation

●

In the main view click on the Overall reference run button to perform a reference run of all gantry and

head axes.

●

Manually slide the PCB stopper to the center of the conveyor width.

●

Place the mapping plate onto the center conveyor.

NOTE

For RV and IC mapping a mapping plate with a dark, dull surface must be used.

In the case of dual conveyors, mapping must be performed for the right and left conveyor tracks.

CAUTION

∆

On no account must the PCB clamping mechanism be actuated during PCB mapping

. If the glass map-

ping plate for PCB mapping is clamped, it may be damaged so severely, that it cannot be used any more.

4 Mapping User’s Manual Test Program SITEST

4.1 Preparatory Steps for the Mapping Operation Software Version 403.xx Edition 07/97

4 - 4

User’s Manual Test Program SITEST 4 Mapping

Software Version 403.xx Edition 07/97 4.2 PCB Mapping

4 - 5

4.2 PCB Mapping

NOTE

Verify that the calibration data for the RV camera, PCB camera, segment offset

(RV-PCB camera offset)

and the MA zero point have already been determined. Furthermore, prior to the performance of the mapping,

the width adjustment must have been calibrated.

●

In the main view click on the icon (for gantry 1 of SIPLACE 80S-20) or the icon (for the gantry of

SIPLACE 80F

)

to switch the screen display to the "Gantry" display (see Fig. 0.3.4).

●

Click on the icon to switch to the "PCB mapping" display.

Fig. 4.2.1 "PCB mapping" Display