00191021-02 - 第149页
User’s Manual Test Program S ITEST 4 Mapping Software Version 403.xx Edition 07/97 4.3 RV Mapping 4 - 11 4.3.1 Mapping Run for Both Gantries (SIPLACE 80S-20) ● Click on the Start button in th e " RV mappin g both g …
4 Mapping User’s Manual Test Program SITEST
4.3 RV Mapping Software Version 403.xx Edition 07/97
4 - 10
Fig. 4.3.1 "RV mapping" Display
The following functions are available in the "RV mapping" display:
–
Right to select the right conveyor track
–
Left to select the left conveyor track of a dual conveyor
–
Start to start the mapping run
(field "RV mapping of selected gantry")
–
Continue to continue mapping
–
Display mapping data to display the mapping data determined
–
Start to perform the mapping run for both gantries of the SIPLACE
(field "RV mapping both gantries")
80S-20 (switching from one gantry to the other is carried out auto-
matically. The mapping run is first carried out for gantry 1, then for
gantry 2).
User’s Manual Test Program SITEST 4 Mapping
Software Version 403.xx Edition 07/97 4.3 RV Mapping
4 - 11
4.3.1 Mapping Run for Both Gantries (SIPLACE 80S-20)
●
Click on the
Start
button in the
"
RV mapping both gantries
"
field.
The mapping run is performed for gantry 1. After the mapping run, gantry 1 is automatically moved to
the park position and subsequently the mapping run for gantry 2 is performed.
After the mapping run has been completed without any errors, the data thus determined is automatically
saved.
●
If a dual conveyor is installed, activate the radio button for the conveyor track for which mapping has
not yet been performed.
●
Click on the
Start
button in the
"
RV mapping both gantries
"
.
The mapping run is performed for both gantries on the selected conveyor track.
After the mapping run has been completed without any errors, the data thus determined is automatically
saved.
●
Click on the icon to return to the main view.
4.3.1.1 Mapping Run for the Second Gantry
●
Click on the
Start
button in the "RV mapping of selected gantry" field.
The active gantry now performs the mapping run. After the mapping run has been completed without
any errors, the data thus determined is automatically saved.
●
If a dual conveyor is installed, activate the radio button for the conveyor track for which mapping has
not yet been performed.
●
Click again on the
Start
button in the
"
RV mapping of selected gantry
"
field.
The active gantry performs the mapping run on the selected conveyor track. After the mapping run has
been completed without any errors, the data thus determined is automatically saved.
●
Click on the icon to return to the main view.
●
In the main view "SIPLACE 80S-20" click on the icon to switch to the "RV head 2" display.
●
Click on the icon to switch to the "RV mapping" display.
●
Click on the
Start
button in the
"
RV mapping of selected gantry
"
field.
Gantry 2 now performs the mapping run.
After the mapping run has been completed without any errors, the data thus determined is automatically
saved.
●
If a dual conveyor is installed, activate the radio button for the conveyor track for which mapping has
not yet been performed.
●
Click again on the
Start
button in the
"
RV mapping of selected gantry
"
field.
●
Gantry 2 performs the mapping run on the selected conveyor track.
After the mapping run has been completed without any errors, the data thus determined is automatically
saved.
●
Click on the icon to return to the main view.
4 Mapping User’s Manual Test Program SITEST
4.3 RV Mapping Software Version 403.xx Edition 07/97
4 - 12
NOTE
RV mapping can also be performed using the
Calibrate machine...
-->
Head mapping
function (see chapt. 3,
section 3.2). On SIPLACE 80S-20 machine types, this function is used to perform automatically the mapping
procedure, first for gantry 1 and then for gantry 2.
If a dual conveyor is installed on the machine, mapping is performed first on the right and then on the left
conveyor track.