00900223-01_ID_OIS_SIS_17.0_R19-2_EN_DE - 第21页

ASM OIS/SIS Datab ases 17.0 (R19 -2) / Interf ace Description 11/2019 Edition 21 4.5.1.13 SHIFTWORK T able Only relevant for OIS C lient. For ev aluations with OIB, s hifts must be m anaged via the Factor y Calendar . SH…

100%1 / 150
ASM OIS/SIS Databases 17.0 (R19-2) / Interface Description 11/2019 Edition
20
Definition of IOrder values
0:
Sequence of the placement machines. Other machines are not arranged.
Definition of StationSelectionState values
0:
Not selected for monitoring
1:
selected for monitoring
2:
selected for monitoring and SiplacePro data are available
4.5.1.10 STATE Table
Only relevant for OIS Client. Determines the display of the states there.
STATE
OIS name
Data type
Byte
I
P
8 user-defined states (T
1
– T
8
), availability (T
b
) and
the definition "show table states" (T
9
)
strTimeShare
nvarchar(32)
64
Name of share of time
strName
nvarchar(32)
64
Color of share of time
lColor
int
4
Show share of time
bDefined
bit
1
4.5.1.11 STATESHARE Table
Only relevant for OIS Client. Determines the display of the states there.
STATESHARE
OIS name
Data type
Byte
I
P
8 user-defined states (T
1
– T
8
), availability (T
b
) and
the definition "show table states" (T
9
)
strTimeShare
nvarchar(32)
64
Machine state, individual states of the state
machine
lState
int
4
Share of time
lPercent
int
4
4.5.1.12 DATAMODEL Table
DATAMODEL
OIS name
Data type
Byte
I
P
Name of the entry
strName
nvarchar(32)
64
Value 1 of data type int
lLong
int
4
Value 2 of data type string
strString
nvarchar(255)
510
Date/time at which this event occurred. Local
station time
dtTime
datetime
8
Value 4 of data type double e
dDouble
float
8
ASM OIS/SIS Databases 17.0 (R19-2) / Interface Description 11/2019 Edition
21
4.5.1.13 SHIFTWORK Table
Only relevant for OIS Client. For evaluations with OIB, shifts must be managed via the Factory
Calendar.
SHIFTWORK
OIS name
Data type
Byte
I
P
Name of shift
strName
nvarchar(32)
64
Starting time of shift
dtStart
datetime
8
4.5.1.14 EVENTTEXT Table
EVENTTEXT
OIS name
Data type
Byte
I
P
Event number
sEvent
smallint
2
Event name
strName
nvarchar(32)
64
4.5.1.15 STATETRANSITION Table
STATETRANSITION
OIS name
Data type
Byte
CI
I
P
Identification number of the station
(reference to STATION table)
lId
int
4
Conveyor belt 1 / 2
ucConveyor
tinyint
1
Processing area 1 / 2
ucProcessingArea
tinyint
1
State based on events
sState
smallint
2
Date/time at which this event occurred. Local
station time
dtTime
datetime
8
Time when the data is written. Local server time
dtCreated
datetime
8
Event number
sEvent
smallint
2
Processing mode
usProcessingMode
tinyint
1
Sequence ID (internal use)
lIdSequence
bigint
8
State history (internal use)
IHistory
int
4
Definition of ucConveyor
The current implementation is processing area specific, i.e. one state machine is available for each
processing area. Future improvements may use a state machine for each processing area and
each conveyor. As long as this improvement is not implemented, the ucConveyor is always set to
"0".
Definition of ucProcessingMode
The ucProcessingMode indicates whether the "Alternating" or "I-Placement" mode was used to
process the board.
Possible values of ucProcessingMode:
0:
Undefined
1:
Alternating mode
2:
I-Placement mode
ASM OIS/SIS Databases 17.0 (R19-2) / Interface Description 11/2019 Edition
22
Definition of sState values
The following table contains the state definitions as well as a short description of the state
semantics.
State
Value
Description
STATE_PCB_BEGIN
1
Production has been started (Conveyor 1)
STATE_PCB_BEGIN2
31
Production has been started (Conveyor 2)
STATE_PCB_END
2
Production has been ended (Conveyor 1)
STATE_PCB_END2
32
Production has been ended (Conveyor 2)
STATE_BREAK_BEGIN
3
Machine reported break mode s
STATE_EMERGENCY_STOP
4
Emergency stop has been pressed
STATE_AIR
5
Not enough air
STATE_STOP
6
Machine has been stopped
STATE_WAIT_PCB_IN
9
Machine runs empty. No board is detected in the input
section.
STATE_WAIT_PCB_INSIDE
10
Board is transported
STATE_WAIT_PCB_OUT
11
Board cannot be moved out of the placement area.
Placement cannot be continued.
STATE_WAIT_DATA
12
Machine is waiting for data
STATE_FIDUCIAL_ERROR
14
A fiducial error has been reported from the station
STATE_TRACK_ERROR
15
A track error has been reported from the station
STATE_MACHINE_ERROR
16
A fatal machine error occurred
STATE_TRANSPORT_ERROR
17
A transport error occurred
STATE_BARCODE_ERROR
18
A barcode error has been reported from the station
STATE_HEAD_STEP
20
Machine entered the head step mode
STATE_KEY_SLOW
21
Machine entered the key slow mode
STATE_VISION
22
Machine entered the Vision mode
STATE_FUNCTION
23
Machine is in "Maintenance" mode
STATE_INIT
24
Machine starts up or still needs data or a successful
reference run for automatic production.
STATE_HOLIDAY
25
Operator entered the works holiday mode
STATE_MAINTENANCE
26
Operator entered the preventive maintenance mode
STATE_SETUP
27
Operator entered the setup mode
STATE_DOWN_PLAN
28
Operator entered the scheduled downtime mode
STATE_DOWN_ILL
29
Operator entered the unscheduled downtime mode
STATE_PROTOTYPE
30
Operator entered the load product mode
STATE_STAND_ALONE_BEGIN
49
Stand alone mode has been entered
STATE_STAND_ALONE_END
50
Stand alone mode has been left
STATE_DISPENSING
70
Printer entered the dispensing mode
STATE_KNEADING
71
Printer entered the kneading mode