00194716-04_AI_Abwurfbehaelter_Abfrage_X-D3_de_en - 第60页

Installation Fitting the Sensors Fitting Sensors for C&P20 and CPP 60 Option Verify Reject Bin Option Abfrage Abwurfbehälter ► Reinsert the component reject bin. Additional reject bin for C PP with stationary ca mera…

Installation

Fitting Sensors for C&P20 and CPP Fitting the Sensors

Option Verify Reject Bin Option Abfrage Abwurfbehälter 59

3.1.1.3 Fitting Sensors for CPP with Stationary Camera or MTC

If the CPP head is operated in pick&place mode with a stationary camera, you will need additional reject

bins for the larger component spectrum. To check the presence of the additional reject bin, use the "up-

grade sensor cable for reject bin [03079030-xx].

If the stationary camera is retrofitted for the CPP head (X series) [00119782-xx], the reject bin and cable

will already have been supplied. If you convert from a TwinHead to a CPP and still use the stationary

camera with the CPP head, you will need to order this cable.

► Fit the connector X2*q of the "reject bin sensors for upgrade" [03079029-xx] cable between the con-

nectors for the CAN nodes [03035229-xx] and that for the standard sensors [03022078-xx]. (See

also the diagram "Overview of sensors for CPP" in section "3.1.1 Fitting Sensors for C&P20 and

CPP" [ ➙ 56])

► When using a stationary camera at a location with a component feed device, please use the short

cable W2 of the sensor S2.

When using a stationary camera at a location with a MTC, please use the long cable W1 of the sen-

sor S1.

► Remove the reject bin.

► Fix sensor S1 to the bracket under the large component reject bin with the two plastic screws M3x10.

Fitting the upgrade "reject bin sensor cable"

[03079029-xx]

1. X2*q cable for feed device X series: reject bin

[03053229-xx]

2. Cable X series/HF R2: reject bin [03022078-xx]

3. Cable: reject bin sensors for upgrade [03079029-xx]

4. Sensor cable

Installation

Fitting the Sensors Fitting Sensors for C&P20 and CPP

60 Option Verify Reject Bin Option Abfrage Abwurfbehälter

► Reinsert the component reject bin.

Additional reject bin for CPP with stationary camera

1. Sensor S1 reject bin at location with component feed

device

2. Recesses on machine base at location 1/3

3. Sensor S2 reject bin at location with MTC

4. Recesses on machine base at location 2/4

Installation

Fitting the Sensors for the TwinHead Fitting the Sensors

Option Verify Reject Bin Option Abfrage Abwurfbehälter 61

3.1.2 Fitting the Sensors for the TwinHead

Version 1: Overview of sensors - TwinHead

Version 2: Overview of sensors for TwinHead with MTC and CAN node infrastructure