MTC 2 mit 35mm Trayhöhe.pdf - 第17页
在线预览 MTC 2 mit 35mm Trayhöhe.pdf PDF 文档。
2 Assembly instructions MTC2 with 35 mm tray height SIPLACE MTC2
08/2007 Edition
16
2.8 Operation of the MTC2
: Load the MTC 2 as described in the manual 00193634-xx.
: Provide a tray with a total height of 35 mm in the SIPLACE machine.
: Use the 35 mm high tray to check if the Twinhead moves over the tray without any contact.
Move the gantry by hand and move the head over the tray. Move over every edge and over the
diagonal to detect possible interfering edges.
2
Make sure that the tray is laying plane on the carrier and is fitted with magnets! 2
2
2
2
2
2
SIEMENS AG 2007 All rights reserved Technische Änderungen vorbehalten
Artikel-Nr.: 00195629-01 Siemens Aktiengesellschaft
Bestellung an:
SIEMENS AG, Automation&Drives
Electronics Assembly
Rupert-Mayer-Strasse 44
D-81359 Muenchen
Printed in the Federal Republic of Germany
SIEMENS AG 2007 All rights reserved Subject to change without prior notice
Order no.: 00195629-01 Siemens Aktiengesellschaft
To be ordered from:
SIEMENS AG, Automation&Drives
Electronics Assembly
Rupert-Mayer-Strasse 44
D-81359 Muenchen
Printed in the Federal Republic of Germany