SIPLACE S-Feeder Repair.pdf - 第2页

SIPLACE S-Feeder Repair This special SIPLACE tool includes:  Short-circu it test box for all SIPLACE S-Feede r modules  Repair box for 2 x 8 mm SIPLACE S-Feeder modules Please contact your regional SIPLACE Service Part…

SIPLACE

S-Feeder Repair

PROFESSIONAL SIPLACE TOOLS

With the SIPLACE S-Feeder

Repair Tools, SIPLACE customers

can have all SIPLACE S-Feeder

modules repaired and adjusted in

accordance with all SIPLACE

specifications.

For the first time, this SIPLACE

solution also makes it possible to

have individual modules or parts

exchanged.

SIPLACE Service

SCENARIO:

 Your SIPLACE S-Feeders did not pass their

verification test.

 Your SIPLACE S-Feeder modules require

repairs.

 You have no capabilities for performing needed

repairs in-house.

The SIPLACE offer:

This service enhances all previous repair options as

well as verification options for SIPLACE S-feeders.

With these special SIPLACE tools, which consist of

testing software and various repair boxes, our

customers can now replace individual parts instead

of entire modules.

SIPLACE S-Feeder Repair

This special SIPLACE tool includes:

 Short-circuit test box for all SIPLACE S-Feeder

modules

 Repair box for 2 x 8 mm SIPLACE S-Feeder

modules

Please contact your regional SIPLACE Service Partner with any questions you may have.

TESTS YOU CAN PERFORM WITH THE TEST SOFTWARE AND TEST BOX

Short-circuit test Check SIPLACE S-Feeder modules for short-circuits

Function tests Test software (for 2x8 mm, 3x8 mm to 12/88 mm SIPLACE S-Feeder

modules)

Check the status of SIPLACE S-Feeder modules

 Read out the counter

 Read out the software version

Functionality of the SIPLACE S-Feeder modules:

 Test individual drives

 Test the foil rocker

 Test the cover strip stuffing gear motor

 Test the membrane buttons

 Check the worm drive play

Test box

Measure the current drawn by the individual drives

Adjustments and repairs: Adjustments:

 Adjust the worm drive (individual parts can be replaced)*

 Adjust the cover strip stuffing gear (disassemble, clean,

reassemble)

Replacements:

 Replace the worm drive (motor, gears)*

 Replace the cover strip stuffing gear

(motors, gear wheels, individual parts)

 Replace the controller

 Test software for all SIPLACE S-Feeder modules

 All cables and interface boxes needed to connect

your SIPLACE S-Feeder modules

 Repair box for 3 x 8 mm SIPLACE S-Feeder

modules and 12mm - 88 mm SIPLACE S-Feeder

modules

* For 2x8 mm and 3x8 mm SIPLACE S-Feeder modules

The information in this specification consists only of general descriptions and / or performance features, which is not contractually binding.

Any specific performance features / capabilities will only be binding if contractually agreed. Subject to changes without notice.

A10011-ASM-G110-EN Edition 6-04/2011

ASM Assembly Systems GmbH & Co. KG

Rupert-Mayer-Str. 44

81379 Munich, Germany

Phone: +49 89 20800-27819

Fax: +49 89 20800-36692

smt-solutions.de@asmpt.com