JO-109-002_JG-0209.pdf - 第2页
Before using this manual, please note the following items. 1. The contents of this manual are subject to change for improvement without prior notice. Please pay attention to the latest information such as the CS news tha…
INSTRUCTION MANUAL
This instruction manual is compiled for those who
use this feeder adjusting jig.
Please read this manual carefully for correct
operations and pay special attention to safety
precautions.
After reading through this manual, please use this
manual as an occasional reference and keep it
within reach.
This manual is made of recycled paper.
JG-0209
1106-002
JO-109-002
May, 2011 First Edition
Feeder Adjusting Jig (Camera Type)
JO-109
Before using this manual, please note the following items.
1. The contents of this manual are subject to change for improvement
without prior notice. Please pay attention to the latest information such as
the CS news that will be provided or issued by our company.
2. The copyright of the instruction manual belongs to Yamaha Motor Co.,
Ltd.
This manual shall not in any shape or form, in whole or part, be
reproduced, copied or disclosed to any third party without the written
content of the publisher.
3. Our company shall not be held to any liability for any damages suffered
or incurred by the end user, arising from any operations other than
those (including the purposes and methods) described in this instruction
manual.
Be sure to handle the machine carefully.
4. This instruction manual neither guarantees any license to industrial
property rights, etc., nor grants any license of such rights.
1106-002
JO-109
11106-002
Before Use
We are grateful to you for purchasing our feeder adjusting jig JG-0209 (camera type).
This feeder adjusting jig is used to measure the component pickup position of the feeder
for “YAMAHA Direct Drive Modular Mounter Sigma-series tape feeder” and write pick
up position offset data in the memory of the feeder .
This instruction manual describes the functions, handling, and operations of the feeder
adjusting jig for those who have nished the basic training of the chip mounter.
Before using the feeder adjusting jig, please read this instruction manual carefully to fully
understand the instructions and precautionary measures for safety purposes.
After reading through this manual, please use this manual as an occasional reference and
keep it within reach.
JO-109