TDS_Sonix_954_CRD_ENG.pdf - 第2页
Sonix ® 954 CRD TECHNICAL DATA SHEET 2 www.dct.cleaning GENERAL INFORMATION The Sonix ® cleaning systems are a unique ultrasonic technology developed and manufactured by DCT. In the past, machines with ultrasonic technol…
Conformal coating removing
PCB cleaning
www.dct.cleaning
www.dct.cleaning
Sonix
®
954 CRD
Piano
TECHNICAL DATA SHEET
CHAMBER
www.dct.cleaning
Sonix
®
954 CRD
TECHNICAL DATA SHEET
2
www.dct.cleaning
GENERAL INFORMATION
The Sonix
®
cleaning systems are a unique ultrasonic
technology developed and manufactured by DCT.
In the past, machines with ultrasonic technology
were used for PCBA, which is no longer used
or recommended due to component sensitivity,
miniaturization, higher rinsing quality
requirements, etc.
We recommend Sonix
®
cleaning systems mainly for
special cleaning applications to eff ectively remove
cured conformal coating.
Exceptionally, they can be used for board cleaning if the
boards are compatible with ultrasonic technology. They are
also suitable for degreasing processes of metal components.
Sonix
®
954 CRD “Piano” including 100% closed loop with
processes of cleaning, rinsing, and drying technologies.
All processes are fully automated and take place in one
process chamber, under which 2 storage tanks are placed,
one with cleaning liquid and the other with rinsing liquid.
The operator places the parts to be cleaned in the
process chamber in the basket, and the cleaning system
automatically performs the cleaning, rinsing and drying
process.
Sonix
®
954 CRD “Piano” is designed for removing cured
conformal coatings from coating frames, coating machine
parts or coated PCBs for repair and subsequent coating.
In certain cases,Sonix
®
954 CRD “Piano” may also be
recommended for PCB cleaning or for degreasing of metal
components.
Depending on your cleaning requirements,
the DCT project manager, in collaboration
with a local distributor, will advise you
on a suitable water-based cleaning fl uid
and the correct setup of the entire process.
Sonix
®
954 CRD
TECHNICAL DATA SHEET
3
www.dct.cleaning
Application
name
Recommended
application
Recommended
temperature
Recommended
time
Capacity
per 8 hours
Conformal coating removing
40 – 55°C 104 – 131 °F 45 min. 980 ** / 144 ***
PCB
35 – 55°C 95 – 131 °F 35 min. 1261 **
3 INDIVIDUAL PROCESSES
CLEANING PARAMETRES
C
CLEANING
RINSING
DRYING
R
D
R
D
C
highly recommended recommended applicable
* PCB eurocards / per 8 hours (calculated for dimension of 100 x 160 mm / 3.94 x 6.3 in)
* * Parts in soldering palette / per 8 hours (320 x 500 x 50 mm / 12,6 x 19,7 x 1,97 in)
* * * Stencils, pumpprints larger than 736 x 736 mm / 29 x 29 in
LEGEND: