OM-1058-002.pdf - 第46页

Tg0409-PM-SO 5.3.4 Monthly Maintenance 0410-002 45 5.3 Maintenance Method Fig. 73 T ake-up Reel Feed Spring (Fig. 75) Feed Lever Fulcrum Pin (Fig. 75) Fulcrum Pin Sliding Section of T ape T ake-up Link (Fig. 76) Slack Li…

100%1 / 105
Tg0409-PM-SO
Fig. 72
0410-002 44
5.3 Maintenance Method
Tape Guide Roller
Every week Cleaning
Clean it with a rag soaked in alcohol.
Tg0409-PM-SO
5.3.4 Monthly Maintenance
0410-002 45
5.3 Maintenance Method
Fig. 73
Take-up Reel Feed Spring (Fig. 75)
Feed Lever Fulcrum Pin (Fig. 75)
Fulcrum Pin Sliding Section of Tape Take-up Link (Fig. 76)
Slack Link Selection Section (Fig. 76)
Tape Feed Link Assembly Fulcrum Section (Fig. 77)
Pick-up Position Adjustment Section (Fig. 77)
Suppressor Holding Lever Fulcrum Pin (Fig. 77)
Transfer Claw Fulcrum Section (Fig. 77)
Shutter Sliding Guide (Fig. 84)
Take-up Reel Feed Roller (Fig. 82)
Locating Lever Fulcrum Section (Fig. 81)
Overrun Stopper Fulcrum Pin (Fig. 78)
Locating Notch Fulcrum Pin (Fig. 78)
Overrun Stopper (Fig. 78)
Pick-up Position Adjustment Pin (Fig. 79)
Shutter Driving Pin (Fig. 79)
Tape Feed Link Assembly Fulcrum Pin (Fig. 79)
Tape Feed Spring (Fig. 81)
Tg0409-PM-SO0410-002 46
5.3 Maintenance Method
• For tape feeders of 12 mm width or more (Including TF-0814)
Table 8-1
Fig. 74
Shutter Driving Pin (Fig. 80)
Tape Feed Link Assembly Fulcrum Pin (Fig. 80)
Pitch Selecting Section on Swing Arm (Fig. 80)
Tape Feed Spring (Fig. 81)
Tape Take-up Link Selection Section (Fig. 83)
Fulcrum Pin of Tape Take-up Link (Fig. 83)
Fig. 75
Fig. 76
Fig. 77
Take-up Reel Feed Spring
Suppressor Holding Lever
Fulcrum Pin
Slack Link Selection Section
Feed Lever Fulcrum Pin
Fulcrum Pin Sliding Section of
Tape Take-up Link
Fig. 75
Fig. 76
Tape Feed Link Assembly
Fulcrum Section,
Pick-up Position Adjustment
Section
Fig. 77
Fig. 77
Transfer Claw Fulcrum Section
Lubrication
Lubrication
Lubrication
Lubrication
Lubrication
Lubrication
Lubrication
Thin Bar
NEW MOLYNOC GREASE No.1
Thin Bar
NEW MOLYNOC GREASE No.1
Thin Bar
NEW MOLYNOC GREASE No.1
Thin Bar
NEW MOLYNOC GREASE No.1
Thin Bar
NEW MOLYNOC GREASE No.1
Thin Bar
NEW MOLYNOC GREASE No.1
Thin Bar
NEW MOLYNOC GREASE No.1
Reference
Drawing
Work Working Tools
Name
Location to be maintained
Check